特点：
每个8位端口的方向可单独编程
64 mA接收器能力（15 mA源）
控制寄存器和数据寄存器的独立板地址译码
用于故障检测和隔离的内置测试逻辑
高可靠性DIN类型I/O连接器
8位、16位、32位传输
VMI VE ME-2510B是VMIC的Megamodule系列的成员，该系列具有通用编程功能。子系统可以配置为连续的I/O地址以节省内存。这些产品（VMI VE ME-1110、VMIVME-2120、VAMI VE ME -2130和VMI VEME-2510B）均设计有两套板卡地址开关，可为CSR提供高效的内存地址映射和I/O地址。可以设置CSR地址开关，使得可以将系统中各种板中的所有CSR映射到连续的存储器位置中。

Megamodule产品还被设计为支持8位、16位和32位数据传输。VMI VE ME-2510B设计了特定的硬件以支持内置测试功能。VMIVME-2510B支持离线和在线故障检测和隔离。前面板故障指示灯用于指示此板上是否存在故障。通电或复位时，LED亮起。成功完成板级诊断后，LED可以熄灭。

产品系列:VMIVME-2510B,VMI vME-250B,vMI vme-2501B,vmi vme系列产品系列

VMIVME-2510-200

Features:
The direction of each 8-bit port can be individually programmed
64 mA receiver capability (15 mA source)
Independent board address decoding of control registers and data registers
Built in testing logic for fault detection and isolation
High reliability DIN type I/O connectors
8-bit, 16 bit, 32-bit transmission
VMI VE ME-2510B is a member of VMIC’s Megamodule series, which has universal programming capabilities. The subsystem can be configured with continuous I/O addresses to save memory. These products (VMI VE ME-1110, VMIVME-2120, VAMI VE ME-2130, and VMI VEME-2510B) are designed with two sets of board address switches, which can provide efficient memory address mapping and I/O addresses for CSR. CSR address switches can be set to map all CSR from various boards in the system to consecutive memory locations.

The Megamodule product is also designed to support 8-bit, 16 bit, and 32-bit data transfer. VMI VE ME-2510B has designed specific hardware to support built-in testing functions. VMIVME-2510B supports offline and online fault detection and isolation. The front panel fault indicator light is used to indicate whether there is a fault on this board. When powered on or reset, the LED lights up. After successfully completing the board level diagnosis, the LED can be turned off.

Product series: VMIVME-2510B, VMI vME-250B, vMI vme-2501B, vmi vme series product series