产品细节说明：PR9268/202-100 EPRO 涡流传感器

涡流传感器与前置器形成一个振荡器，振幅随着传感器探头与金属被测物的接近而衰减，衰减的幅度与传感器和被测物之间的距离成正比。出厂前已经使用校准材料对传感器与前置器成套地进行了线性校准，因此安装时不需要再做校准。用户只需要调整传感器和测量面之间的气隙，直至从前置器的输出得到所需信号。PR9268/202-100 EPRO涡流传感器是一款性能优异、应用广泛的工业传感器，适用于各种涡轮机械的振动和位移测量。

产品详情参数 ：PR9268/202-100 EPRO 涡流传感器

• 品牌：EPRO
• 规格：62×75
• 型号：PR9268/202-100
• 颜色：银色
• 物料编码：PR9268/202-100
• 输出频率：75

应用领域：PR9268/202-100 EPRO 涡流传感器

• 应用广泛：EPRO涡流传感器被广泛应用于各种工业领域及实验室，具有体积小、可靠性高、非接触测量等优点。
• 测量精准：适用于各种涡轮机械，可测量例如轴振动、轴位移等物理量，也可用于静态和动态位移量的非接触式测量，如轴向和径向轴位移、轴偏心、轴瓦的磨损、油膜厚度、裂纹检测等。
• 符合标准：EPRO涡流传感器的制造及使用符合多种国际通用标准，例如API 670、DIN 45670和ISO 10817-1。在加装安全栅后，传感器和前置器也可以在需要防爆的环境下工作，符合相关的欧洲标准EN 50014/50020。

Product Details: PR9268/02-100 EPRO Eddy Current Sensor

The eddy current sensor and the preamplifier form an oscillator, and the amplitude decays as the sensor probe approaches the metal object being measured. The magnitude of the attenuation is proportional to the distance between the sensor and the object being measured. The sensor and preamplifier have already been linearly calibrated using calibration materials before leaving the factory, so no further calibration is required during installation. Users only need to adjust the air gap between the sensor and the measuring surface until the desired signal is obtained from the output of the preamplifier. PR9268/02-100 EPRO eddy current sensor is an excellent and widely used industrial sensor, suitable for vibration and displacement measurement of various turbomachinery.

Product details and parameters: PR9268/202-100 EPRO eddy current sensor
Brand: EPRO
Specification: 62 × 75
Model: PR9268/202-100
Color: Silver
Material Code: PR9268/202-100
Output frequency: 75
Application area: PR9268/02-100 EPRO eddy current sensor
Widely used: EPRO eddy current sensors are widely used in various industrial fields and laboratories, with advantages such as small size, high reliability, and non-contact measurement.
Accurate measurement: Suitable for various types of turbomachinery, it can measure physical quantities such as shaft vibration and displacement, as well as non-contact measurement of static and dynamic displacement quantities, such as axial and radial shaft displacement, shaft eccentricity, bearing wear, oil film thickness, crack detection, etc.
Compliant with standards: The manufacturing and use of EPRO eddy current sensors comply with various internationally recognized standards, such as API 670, DIN 45670, and ISO 10817-1. After installing safety barriers, sensors and preamplifiers can also operate in explosion-proof environments, in compliance with relevant European standards EN 50014/50020.