技术规格PMF1216D61

Modbus主/从的ProLinx远程I/O适配器网关在设备之间创建强大的连接远程I/O网络和Modbus设备。这个独立的DINrail安装协议网关提供一个远程I/O端口和最多4个串口。里约热内卢接口是一个可以连接的适配器(从接口)控制数据传输的扫描仪(主)。这个模块支持有限的高速数据传输通过输入和输出图像。Modbus协议同时支持Master和Slave实现。所有Modbus串口都是单独的可配置，提供Modbus RTU或Modbus ASCII的选择串行协议支持。

功能规格-罗克韦尔自动化远程I / O—机架号寻址:0 ~ 63机架尺寸:1 / 4机架、1 / 2机架、3 / 4机架和全机架—起始组:0、2、4、6最后一架:是或否波特率:57.6K、115K、230K支持扫描仪的数据块传输支持I/O数据移动。数量机架尺寸配置决定* BTR命令-最多63个单词-最多64个字功能规范Modbus主配置为虚拟Modbus Master的端口主动向Modbus网络中的其他节点。Master端口有一个优化的轮询特征，投票奴隶与沟通问题较少频繁。命令列表每个Master端口最多100个命令，每个命令都是满的可配置的功能，从地址，寄存器到/从寻址和字/位计数。命令轮询列表命令列表的可配置轮询，包括连续轮询并且对数据的变化，动态用户或自动启用。状态数据在单个命令基础上可用的错误码。在此外，每个活动都维护一个从机状态列表Modbus主端口。Modbus奴隶配置为Modbus从站的端口允许远程Master与所有数据交互包含在模块中。这些数据可以从其他Modbus从设备上获得网络，通过Master端口，或从模块。

PMF1216D61

The ProLinx remote I/O adapter gateway of Modbus master/slave creates a powerful connection between devices and the remote I/O network and Modbus devices. This independent DINrail installation protocol gateway provides a remote I/O port and up to 4 serial ports. The Rio de Janeiro interface is a scanner (master) that can be connected to an adapter (slave interface) to control data transmission. This module supports limited high-speed data transmission through input and output images. The Modbus protocol supports both Master and Slave implementations. All Modbus serial ports are individually configurable and provide optional serial protocol support for Modbus RTU or Modbus ASCII.

Functional Specifications – Rockwell Automation Remote I/O – Rack Number Addressing: 0~63 Rack Size: 1/4 Rack, 1/2 Rack, 3/4 Rack, and Full Rack – Starting Group: 0, 2, 4, 6 Last Rack: Yes or No Baud Rate: 57.6K, 115K, 230K Supports scanner data block transfer and I/O data movement. The quantity of rack size configuration determines * BTR command – up to 63 words – up to 64 words functional specification Modbus main configuration is virtual Modbus Master’s port actively connects to other nodes in the Modbus network. The Master port has an optimized polling feature that reduces the frequency of voting slaves and communication issues. The command list has a maximum of 100 commands per Master port, and each command is full of configurable functions, from address, register to/from addressing and word/bit counting. Command Polling List The configurable polling of the command list includes continuous polling and dynamic user or automatic activation of data changes. Error codes where status data is available on a single command basis. In addition, each activity maintains a list of slave state Modbus master ports. Modbus slave configuration allows remote master to interact with all data included in the module through the port of the Modbus slave station. These data can be obtained from other Modbus devices on the network, through the Master port, or from modules.