产品详情：IS215VCMIH2CA IS200VCMIH2CAA 涡轮控制PCB板

IS200VCMIH2CAA是阿格Mark VI板卡组件。该板设计用于Speedtronic系统，功能相当于通信卡。它通常安装在VME机架的第一个插槽中。

IS200VCMIH2CAA有一个附加的前面板。面板使用沿着电路板前边缘的螺丝固定件连接到电路板上。两个螺丝固定架位于面板的顶部和底部边缘。这些有助于在安装后将板牢固地锁定在机架中，也有助于在更换板时将其从背板上取下。其中一个标有GE标志，另一个标有主板ID号。该板的面板由三个IONet连接器、一个串行端口(阳)和一个复位按钮组成，串行端口带有螺钉连接以确保相关电缆的安全。此外，面板上有四组LED指示灯。每个或每组指示灯都贴有正确的标签。

IS200VCMIH2CAA的正面和背面都有组件。背面主要由电容和电阻组成。电路板的前表面还包括电容和电阻，以及40多个集成电路(包括FPGAs)、几个连接器，包括两个背板、测试点、电感/扼流圈和晶体管。

IS215VCMIH2CA

IS200VCMIH2CAA is an AgMark VI board component. This board is designed for the Speedtronic system and functions like a communication card. It is usually installed in the first slot of the VME rack.
IS200VCMIH2CAA has an additional front panel. The panel is connected to the circuit board using screw fasteners along the front edge of the circuit board. Two screw fixing brackets are located at the top and bottom edges of the panel. These help to securely lock the board into the rack after installation, and also help to remove it from the backplane when replacing the board. One of them is marked with the GE logo, and the other is marked with the motherboard ID number. The panel of the board consists of three IONet connectors, a serial port (male), and a reset button. The serial port is connected with screws to ensure the safety of the relevant cables. In addition, there are four sets of LED indicator lights on the panel. Each or every set of indicator lights is labeled correctly.
IS200VCMIH2CAA has components on both the front and back. The back is mainly composed of capacitors and resistors. The front surface of the circuit board also includes capacitors and resistors, as well as over 40 integrated circuits (including FPGAs), several connectors, including two backboards, test points, inductors/chokes, and transistors