IS200CABPG1BAA is a Control Component Backboard (CABP) manufactured by General Electric for its innovative series.

IS200CABPG1BAA is typically a replacement board for the innovative series rack component backplane. The rack does not come with this motherboard and is sold separately. The rack provides additional mounting points for the board being installed. Other PCBs can be inserted into 5 slots on IS200CABPG1BAA, allowing for interaction and connection with external signals. This board provides connections to these external interface devices. These connections include ISBus ports, power inputs, diagnostic tools, front panel keyboards, and front panel instruments.

The plug design of IS200CABPG1BAA does not allow accidental insertion of incorrect sockets in non board connections. PCBs inserted into the backplane should be installed with care, as although they use different separate keying connections, sliding them into the wrong slot can easily damage the circuit board. Slot 1 on the motherboard is assigned to the BAIA board. Slot 2 is assigned to the DSPX board. Slot 3 is designated as ACL_board for GBIA/PBIA modules. Slot 4 is used for the BIC board. Slot 5 is used for BPI or FOSA boards. There are two plug-in connectors labeled E1 and E2 connected to GND. There are two other plug-in connectors labeled E3 and E4 connected to CCOM. There are 21 jumper wires on this board. The J1-J12 jumper is an external interface. J13-J21 is the actual card slot on the backplane.