IS200CPFPG1A是一种被称为控制电源闪光保护电路板或CPFP的设备。这是一种印刷电路板或PCB，由通用电气或GE开发，作为Mark VI系列的一部分。Mark VI及其所有前身系列是为燃气/蒸汽轮机控制而创建的Mark系列的一部分。自1969年Mark I问世以来，Mark系统一直被用来控制燃气和蒸汽轮机过程。

IS200CPFPG1A控制电源闪存保护(CPFP)板被称为创新系列交流驱动器的保护性电源分配器。CPFP也监控这种中压驱动。IS200CPFPG1A保护48伏电源总线，并将隔离控制电源分配给桥接接口板。该设备监控输入线路保险丝状态和电源电缆的绝缘故障。CPFP通常安装在隔离的面板上，位于驱动器的高功率部分内。CPFP包含两个3针输入连接器和七个3针输出连接器。这些用于控制力的分配。在IS200CPFPG1A的中间和左半部分放置了三(3)个小保险丝。这些保险丝由标签FU1、FU2和FU3标识。其中两(2)个包含一百二十五(125)伏电压，最后一个包含二百五十(250)伏电压。IS200CPFPG1A的边缘周围有11个插孔连接器端口。其中七(7)个连接到右边界，其余四(4)个位于左边界。

IS200CPFPG1A

IS200CPFPG1A is a device called Control Power Flash Protection Circuit Board or CPFP. This is a printed circuit board or PCB developed by General Electric or GE as part of the Mark VI series. The Mark VI and all its predecessor series are part of the Mark series created for gas/steam turbine control. Since the introduction of Mark I in 1969, Mark systems have been used to control gas and steam turbine processes.

The IS200CPFPG1A Control Power Flash Protection (CPFP) board is known as the protective power distributor for the innovative series of AC drives. CPFP also monitors this medium voltage drive. IS200CPFPG1A protects the 48 volt power bus and distributes isolated control power to the bridge interface board. This device monitors the status of input line fuses and insulation faults in power cables. CPFP is typically installed on isolated panels, located within the high-power section of the driver. CPFP includes two 3-pin input connectors and seven 3-pin output connectors. These are used to control the distribution of forces. Three (3) small fuses were placed in the middle and left half of IS200CPFPG1A. These fuses are identified by labels FU1, FU2, and FU3. Two (2) of them contain one hundred and twenty-five (125) volts, and the last one contains two hundred and fifty (250) volts. There are 11 socket connector ports around the edge of IS200CPFPG1A. Seven (7) of them are connected to the right boundary, while the remaining four (4) are located on the left boundary.

我司优势：

漳州风云电子商务有限公司是一家长年专业从事全球知名品牌ABB DSC机器人系统模块备件及西门子摩尔（Siemens Moore APACS）控制系统零部件销售企业、我们售出的备品备件均提供一年的质量保证、并且都经过了严格的测试和认证。
主营品牌：ABB，Allen-Bradley，Schneider，Siemens，GE Fanuc,Yaskawa，Mitsubishi，Bosch Rexroth，Foxboro，Tricon，Ovation，Motorola，Xycom，Honeywell，Woodward，CUTLER HAMMER，KEYENCE，KUKA，MATROX，NI OMRON，Phoenix，SEW，Panasonic等进口自动化系统备件销售及系统集成的高新技术企业 对各大自动化品牌产品有着强大的优势，同时配备优良的工程团队。
我司能直接从境外进货、能够提供不同国别、厂商的设备以及备件、解决您多处寻找的麻烦或对产品质量问题的担心等、在价格上我们有很大的优势、产品详细信息、竭诚欢迎您来电查询或使用E-mail查询！
本公司以停产控制系统零部件、为优势产品
只要是您想要的，我都能帮您找到！价格从优!
我们的宗旨：
【以真诚建立客户的关系】
【以服务获得顾客的满意】
【以产品赢得顾客的信赖】
【以行动提升工作效率】
你急需的产品,请联系我们!
你询不到的产品,请联系我们!
你买不到的产品,请联系我们！

其他相关型号：