IS200AEAAH1CPR1 is an Arg PCB designed as a component of the Mark VI series. The Mark VI is part of the Speedtronic series used for gas/steam heavy-duty turbine management. Since the release of GE’s first Speedtronic system (Mark I) in the late 1960s, this series has been in use. Mark VI adopted the most advanced technology at the time, including a Windows based PC operating interface. Mark VI is also designed around GE proprietary software, such as CIMPLICITY graphics and the GE control system toolbox for maintenance.

IS200AEAAH1CPR1 has three terminal blocks. They are placed parallel to each other on the surface of the circuit board. Each bar has 12 positions. There is a socket connector on the right edge of the motherboard. This is a right angle connector. There is also a 2-position female connector (J4) along the top edge. The board has a three pin vertical plug connector along the top edge. This is marked as P18.

IS200AEAAH1CPR1 has 16 vertical metal connectors. Eight of them are located on the left edge of the circuit board. These are marked as P1 to P8. P10 to P17 are located in two boxes on the top edge of the circuit board, with even numbered connectors in one box and odd numbered connectors in the other box.

IS200AEAAH1CPR1 has eight relays. These markings are K1 to K8. They are located in two blocks on the board, with four in each block. There are two heat sinks next to these components. There are three large wire wound resistors directly below the radiator. This board also has over 200 other types of resistors. It also has various capacitors and diodes, as well as over forty integrated circuits.