产品细节：IC697PWR724F 电源模块

IC697PWR724模块是由GE Fanuc Automation设计、制造和销售的电源模块。该电源模块提供24伏DC电压和90瓦输出功率。该模块的设计使其能够插入机架，尤其是最左侧的插槽。该模块通过机架上的48针背板安装连接器进行连接。该电源模块提供不同的电压，以适应操作和逻辑电平序列信号。GE Fanuc Automation IC697PWR724电源模块可在单个机架应用中运行，同时可为2个机架供电。总负载必须在额定规格范围内，并且通过电缆与第二个机架互连。

GE Fanuc Automation IC697PWR724电源模块的额定电压为24伏DC，可接受18至32伏DC的输入电压。该模块还带有过压和过流保护。如果模块用于温度高于60摄氏度的环境中，可能需要降额。GE Fanuc Automation IC697PWR724电源模块的额定输入功率为160瓦，最大额定输入浪涌能量为22焦耳。它在20伏DC下也有10毫秒的穿越时间。输出电压可以是5、12或-12伏DC，额定电流分别为26、4或2安培。该电源模块可与VME集成机架一起使用。

IC697PWR724F

The IC697PWR724 module is a power module designed, manufactured, and sold by GE Fanuc Automation. This power module provides a 24 volt DC voltage and a 90 watt output power. The design of this module allows it to be inserted into the rack, especially the leftmost slot. This module is connected through a 48 pin backplane mounted connector on the rack. This power module provides different voltages to adapt to operational and logical level sequence signals. The GE Fanuc Automation IC697PWR724 power module can operate in a single rack application and can power two racks simultaneously. The total load must be within the rated specification range and interconnected with the second rack through cables.
The rated voltage of the GE Fanuc Automation IC697PWR724 power module is 24 V DC and can accept input voltages of 18 to 32 V DC. This module also comes with overvoltage and overcurrent protection. If the module is used in environments with temperatures above 60 degrees Celsius, it may need to be derated. The rated input power of the GE Fanuc Automation IC697PWR724 power module is 160 watts, and the maximum rated input surge energy is 22 joules. It also has a 10 millisecond travel time at 20 volts DC. The output voltage can be 5, 12, or -12 volts DC, with a rated current of 26, 4, or 2 amperes, respectively. This power module can be used with VME integrated racks.