产品细节：IC697CMM741 接口设备

IC697CMM741接口设备由GE Fanuc在其90-70系列产品线中制造，作为TCP/IP以太网LAN设备或GE 90-70 MMS设备的接口。IC697CMM741接口也是一个以太网控制器，它可以将PLC直接连接到局域网，如IEEE 802.3 CSMA/CD局域网。这种以太网控制器是为GE系列90-70 IC 697可编程控制器制造的，它只需要PLC机架中的一个插槽就可以安全安装。IC697CMM741以太网控制器使用的软件可以通过RAM轻松加载或升级，并且控制器可以在断电后至少保留其软件6个月。它可以使用的软件包括TCP/IP和MMS/OSI通信软件、完整的Windows和DOS编程和通信软件，以及为综合诊断和台站管理而开发的软件。

GE系列90-70 IC697CMM741以太网控制器和接口可以通过用户提供的收发器电缆或AUI(附件接口)电缆连接到收发器设备，该电缆通过其具有15个引脚的标准D型连接器。电缆和收发器是以太网控制器连接到以太网LAN的方式。用户可以通过3个led来监控控制器接口的状态。IC697CMM741以太网控制器中的RAM使用电池作为备用，RAM存储所有通信软件。该控制器和接口设备还具有ROM和固件，用于存储其使用的基本功能、配置软件和诊断功能。

IC697CMM741

The IC697CMM741 interface device is manufactured by GE Fanuc in its 90-70 series product line as an interface for TCP/IP Ethernet LAN devices or GE 90-70 MMS devices. The IC697CMM741 interface is also an Ethernet controller that can directly connect a PLC to a local area network, such as IEEE 802.3 CSMA/CD local area network. This Ethernet controller is manufactured for the GE series 90-70 IC 697 programmable controller and can be safely installed with only one slot in the PLC rack. The software used by the IC697CMM741 Ethernet controller can be easily loaded or upgraded through RAM, and the controller can retain its software for at least 6 months after a power outage. The software it can use includes TCP/IP and MMS/OSI communication software, complete Windows and DOS programming and communication software, as well as software developed for comprehensive diagnosis and station management.
The GE series 90-70 IC697CMM741 Ethernet controller and interface can be connected to the transceiver device through a user provided transceiver cable or AUI (accessory interface) cable, which is a standard D-type connector with 15 pins. Cables and transceivers are the way Ethernet controllers connect to Ethernet LANs. Users can monitor the status of the controller interface through three LEDs. The RAM in the IC697CMM741 Ethernet controller uses batteries as backup and stores all communication software. The controller and interface device also have ROMs and firmware for storing basic functions, configuration software, and diagnostic functions used.