IC694MDL754是一款PACSystem RX3i器件。该模块特别是一个三十二(32)点离散输出模块，具有两(2)个隔离的十六(16)个输出通道组，并支持正逻辑布线配置。每个通道设计为提供10.2 – 20.0 VDC的输出电压范围，标称电压输出为12 / 24 VDC，每个通道的输出电流为0.75安培。该模块带有各种电子保护额定值，如短路、过电流和过热保护。每个保护功能都支持自动恢复功能。

IC694MDL754以前由GE Intelligent Platforms制造，但最近被艾默生自动化收购。该模块占用一个插槽，可以安装到任何远程I/O站的本地CPU机架的任何空闲插槽中。它特别兼容RX3i CPU版或更高版本的安装。它设计用于盒式(IC694TBB032)或弹簧式(IC 694 TBB 032)前端子板。该模块被归类为带独立LED状态指示器的低电压模块。

IC694MDL754的背板电流为300 mA(最大值),来自背板上的5v总线，需要外部电源提供+12 VDC至+30 VDC电源电压范围，标称电源为12/24 VDC标称值。每个通道的最大响应时间为0.5 ms，最大输出漏电流为0.1 mA，典型稳态过流跳闸为每点5安培。该模块的额定涌入电流为3安培，持续10毫秒，无ESCP跳闸。

GE Fanuc IC694MDL754输出模块是RX3i PACSystems PLCs的12/24伏DC额定正逻辑输出模块。IC694MDL754输出模块属于RX3i PACSystems中档控制器系列。与同类产品中的大多数离散输出模块一样，IC694MDL754输出模块通过其32个离散输出点提供RX3i控制器和外部输出设备之间的接口。输出被分组到2个隔离的输出组共用区，每个共用区有16个输出点。每个输出点都有内置的电子短路和过流保护，当出现短路或过流情况时，它会生成故障报告并将其发送给RX3i控制器。IC694MDL754输出模块输出可以是正逻辑或源类型输出，它们可以将负载切换到电源的正端，同时向负载提供电流。作为一项标准功能，IC694MDL754输出模块的输出可以在12至24伏DC (+20%至-15%)范围内切换负载，每个输出点可以提供高达0.75安培的最大电流。

GE Fanuc RX3i IC694MDL754输出模块的额定电压为12/24伏DC，工作电压范围为10.2至30.0伏DC。IC694MDL754输出模块在5.0伏DC下汲取300毫安的背板电流，其输出电流额定值为每点0.75安培。IC694MDL754输出模块的浪涌电流额定值为3.0安培(持续10毫秒)，最大响应时间为0.5毫秒。IC694MDL754输出模块的后端有一个DIP开关，用于选择输出模式，它还有32个led，用于显示各个输出点的状态。IC694MDL754输出模块安装在RX3i PLC系统的任何I/O插槽上，并且仅与固件版本为2.90或更高版本的RX3i系列CPU兼容。

IC694MDL754

IC694MDL754 is a PACSystem RX3i device. This module, particularly a thirty-two (32) point discrete output module, has two (2) isolated sixteen (16) output channel groups and supports positive logic wiring configurations. Each channel is designed to provide an output voltage range of 10.2-20.0 VDC, with a nominal voltage output of 12/24 VDC and an output current of 0.75 amperes per channel. This module comes with various electronic protection ratings, such as short circuit, overcurrent, and overheating protection. Each protection function supports automatic recovery. IC694MDL754 was previously manufactured by GE Intelligent Platforms, but recently acquired by Emerson Automation. This module occupies one slot and can be installed in any idle slot in the local CPU rack of any remote I/O station. It is particularly compatible with the installation of RX3i CPU version or higher. It is designed for box type (IC694TBB032) or spring type (IC 694 TBB 032) front-end daughter boards. This module is classified as a low-voltage module with independent LED status indicators. The backplane current of IC694MDL754 is 300 mA (maximum), coming from the 5V bus on the backplane and requiring an external power supply to provide a voltage range of+12 VDC to+30 VDC. The nominal power supply is 12/24 VDC. The maximum response time for each channel is 0.5 ms, the maximum output leakage current is 0.1 mA, and a typical steady-state overcurrent trip is 5 amps per point. The rated inrush current of this module is 3 amperes for 10 milliseconds without any ESCP tripping.

我司主营品牌