产品详情：IC694MDL752 分立输出模块

IC694MDL752是一个分立输出模块，能够在5 VDC (TTL)模式和12/24 VDC电压模式下工作。该模块旨在为工作在10.2-28.8 VDC的典型电气负载和工作在4.75-5.25 VDC电压范围的电子负载供电。该模块是艾默生自动化的PACSystem RX3i的一部分，以前由通用电气智能平台提供。

IC694MDL752是单插槽宽度模块，可安装到RX3i背板的任何可用插槽中。它可以作为安装在本地CPU机架上的本地输出模块，也可以作为安装在分布式I/O站上的分布式输出模块。IC694MDL752模块实例的数量取决于可用的模块插槽和主机处理器支持的I/O容量。作为一个高密度输出模块，它配备了两(2)个嵌入式紧凑型模块连接器阵列，与两个24针插头连接器(富士通FCN–365 p024–AU)兼容。它接受用户定制的组装电缆，并与目录号为IC694CBL327和IC694CBL328的预布线电缆兼容。

IC694MDL752在TTL模式下最大输出电流为每点25mA在12/24V模式下配置时，最大值为每点0.5安培；每组最大4安培，每组公共引脚最大3安培。该模块从背板上的5伏总线获得的最大电流为260毫安，在+ 4.7毫安/LED上为13毫安+ 3毫安/点；当所有组输出通电时，在5v直流时，每组最大12 mA(最大值);12 VDC时用户电源为每组25 mA(最大值),组内所有输出均启动24 VDC时用户电源为每组44 mA(最大值),组内所有8个输出均开启。

GE Fanuc IC694MDL752 5/24伏DC TTL输出模块是为RX3i PACSystems平台制造的32点负逻辑输出模块。该输出模块有32个离散输出，每组4个(每组包含8个输出点)，它还提供负逻辑或吸电流型输出，每个点能够吸收高达25毫安的电流。IC694MDL752输出模块提供两种工作模式，TTL模式和12/24伏模式。在TTL模式下，IC694MDL752输出模块的输出可以在+5伏DC (+/-5%)范围内切换负载，在12/24伏模式下，它们可以将负载保持在12至24伏DC之间，并且每点能够吸收高达0.5安培的最大电流。

IC694MDL752输出模块有4组共用，每组有一个2针I/O连接器，每组最大负载为3.0安培。IC694MDL752输出模块中的每个公共组可以同时支持多种负载类型。例如，IC694MDL752输出模块可以同时驱动不同组中的12伏DC负载、24伏DC负载和TTL负载。IC694MDL752输出模块的额定工作电压为5.0至24.0伏DC，工作范围为4.75至5.25伏DC (TTL模式)或10.2至28.8伏DC (12/24伏DC模式)。模块上的每个输出点都有一个内部拉电阻，它们都相互隔离。IC694MDL752输出模块具有4.6安培的10毫秒最大浪涌额定值。它还有0.5毫秒的标准信号响应时间。IC694MDL752输出模块安装在PLC的I/O插槽中，仅与RX3i CPUs兼容。

IC694MDL752

IC694MDL752 is a discrete output module that can operate in 5 VDC (TTL) mode and 12/24 VDC voltage mode. This module aims to power typical electrical loads operating at 10.2-28.8 VDC and electronic loads operating in the voltage range of 4.75-5.25 VDC. This module is part of Emerson Automation’s PACSystem RX3i and was previously provided by the General Electric Intelligent Platform.
IC694MDL752 is a single slot width module that can be installed in any available slot on the RX3i backplane. It can be installed as a local output module on a local CPU rack, or as a distributed output module installed on a distributed I/O station. The number of IC694MDL752 module instances depends on the available module slots and the I/O capacity supported by the host processor. As a high-density output module, it is equipped with two (2) embedded compact module connector arrays, compatible with two 24 pin plug connectors (Fujitsu FCN-365 p024-AU). It accepts customized assembly cables from users and is compatible with pre wired cables with catalog numbers IC694CBL327 and IC694CBL328.
The maximum output current of IC694MDL752 in TTL mode is 25mA per point. When configured in 12/24V mode, the maximum value is 0.5 amperes per point; Each group has a maximum of 4 amperes, and each common pin has a maximum of 3 amperes. The maximum current obtained by this module from the 5V bus on the backplane is 260mA, which is 13mA+3mA/point at+4.7mAh/LED; When all group outputs are powered on, at 5V DC, each group has a maximum of 12 mA (maximum value); At 12 VDC, the user power supply is 25 mA per group (maximum value), and all outputs within the group are turned on. At 24 VDC, the user power supply is 44 mA per group (maximum value), and all 8 outputs within the group are turned on.
The GE Fanuc IC694MDL752 5/24V DC TTL output module is a 32 point negative logic output module manufactured for the RX3i PACSystems platform. This output module has 32 discrete outputs, with 4 in each group (each containing 8 output points). It also provides negative logic or current absorbing outputs, with each point capable of absorbing up to 25 milliamperes of current. The IC694MDL752 output module provides two operating modes, TTL mode and 12/24V mode. In TTL mode, the output of the IC694MDL752 output module can switch the load within the range of+5 V DC (+/-5%). In 12/24 V mode, they can maintain the load between 12 and 24 V DC and can absorb a maximum current of up to 0.5 amperes per point.
The IC694MDL752 output module has 4 groups shared, each with a 2-pin I/O connector, and each group has a maximum load of 3.0 amperes. Each common group in the IC694MDL752 output module can support multiple load types simultaneously. For example, the IC694MDL752 output module can simultaneously drive 12 volt DC loads, 24 volt DC loads, and TTL loads in different groups. The rated working voltage of the IC694MDL752 output module is 5.0 to 24.0 volts DC, with a working range of 4.75 to 5.25 volts DC (TTL mode) or 10.2 to 28.8 volts DC (12/24 volts DC mode). Each output point on the module has an internal pull-out resistor, which is isolated from each other. The IC694MDL752 output module has a maximum surge rating of 4.6 amperes for 10 milliseconds. It also has a standard signal response time of 0.5 milliseconds. The IC694MDL752 output module is installed in the I/O slot of the PLC and is only compatible with RX3i CPUs.