产品详情：IC694ALG220 模拟输入组件

GE Fanuc IC694ALG220模拟输入模块是GE RX3i PacSystems系列的一员，它与每一个GE Fanuc CPU兼容。该模拟输入模块不支持热插拔，这意味着它不能安装在仍然通电并连接到电源的系统中或从该系统中移除。尝试热插拔IC694ALG220模拟输入模块可能会导致设备损坏或严重伤害。该输入模块有4个输入通道。在5伏DC电压下，该模块具有27毫安和0.135瓦的最大负载要求。它可以接受-10到+10伏范围内的输入电压。该模块上的4个输入通道中的每一个都可以处理4至20毫安的输入电流，并在所有输入端子之间进行跳线。

GE Fanuc RX3i PAC system IC 694 alg 220模拟输入模块可安装在阿格RX3i PLC系统的任何可用I/O插槽中。其每个输入通道的转换速度为1毫秒，每个通道的更新速率为4毫秒。当IC694ALG220模拟输入模块安装在阿格RX3i通用背板中时，它需要一个额定24伏DC的外部电源，并通过左侧的TB1连接器连接到背板。当IC694ALG220模拟输入模块安装在RX3i远程或扩展背板中时，它由背板电源以24伏DC隔离输出电压供电。

IC694ALG220

The GE Fanuc IC694ALG220 analog input module is a member of the GE RX3i PacSystems series and is compatible with every GE Fanuc CPU. The analog input module does not support hot swapping, which means it cannot be installed or removed from a system that is still powered on and connected to a power source. Attempting to hot plug the IC694ALG220 analog input module may cause device damage or serious injury. This input module has 4 input channels. At a voltage of 5 volts DC, the module has a maximum load requirement of 27 milliamperes and 0.135 watts. It can accept input voltage within the range of -10 to+10 volts. Each of the four input channels on this module can handle input currents ranging from 4 to 20 milliamperes, and jumper between all input terminals.
The GE Fanuc RX3i PAC system IC 694 alg 220 analog input module can be installed in any available I/O slot of the ARX3i PLC system. The conversion speed of each input channel is 1 millisecond, and the update rate of each channel is 4 milliseconds. When the IC694ALG220 analog input module is installed in the Ager RX3i universal backplane, it requires an external power supply rated at 24V DC and connected to the backplane through the left TB1 connector. When the IC694ALG220 analog input module is installed in the RX3i remote or expansion backplane, it is powered by the backplane power supply with a 24V DC isolated output voltage.