产品详情：IC693NIU004 以太网网络接口单元

IC693NIU004是90-30系列可编程逻辑控制器(PLC)模块。具体地说，这是一个以太网网络接口单元(NIU ),主要用于在以太网上实现分布式I/O架构，利用以太网全球数据(EGD)协议交换I/O数据，通过单工或容错以太网拓扑监视和控制远程系统。IC693NIU004配有两(2)个以太网通信接口，具有自动感应、自动协商功能，支持10/100 Mbps的传输速率。这些端口使用一(1)个IP地址，因此充当内置以太网交换机，可用于线性、星形和环形拓扑。该模块具有处理多达2048个离散输入(%I)的能力；2048离散输出(% Q)；1268个模拟输入字(%AI)和512个模拟输出字(%AQ)。除了这些用于物理I/o的寄存器，IC693NIU004还内置了4096内部线圈存储器；256位临时输出线圈和9999个寄存器存储器。该模块支持多达8个基板的互连，包括一(1)个CPU基板和七(7)个扩展和远程基板。IC693NIU004还支持安全实时传输协议(SRTP)服务器。IC693NIU004带有状态LED指示灯，如EOK、LAN、STAT和PS端口。它还配有一个以太网重启按钮，可用于重新初始化模块，无需切断电源或使用编程软件。适用于该模块的编程软件包是CIMPLICITY Machine Edition Logic Developer 4.0，service pack 3，以及Special 4或更高版本。

GE Fanuc IC693NIU004以太网网络接口为GE Fanuc系列90-30可编程逻辑控制器通过内置的10/100 Base-T/TX以太网交换机连接到工业以太网协议提供了一个网关。该以太网接口模块配备了两个具有自动感应功能的RJ45端口。多达2，048个离散输入和2，048个离散输出可通过以太网协议连接、监控和控制。GE Fanuc IC693NIU004以太网网络接口还可以处理多达1268个模拟输入和多达512个模拟输出。凭借如此高速、精确的处理和数据传输能力，这款以太网网络接口模块是跨越大量现场设备的工业应用过程的理想之选。

GE Fanuc IC693NIU004以太网网络接口的工作温度应始终保持在0至60摄氏度(32至140华氏度)之间。当模块长时间暴露在高于(或低于)额定温度范围的温度下时，可能会出现性能问题。还应控制环境湿度，因此建议将GE Fanuc IC693NIU004以太网接口安装在受保护的配电盘内，最好带有气候控制或强制空气循环。本装置的安装只能由经过适当培训的技术人员进行，并且只能由合格的技术人员对模块进行维护、保养或修理。设备的配置通过CIMPLICITY Machine Edition Logic Developer软件完成，该软件是执行分配IP地址和设置转租参数等基本活动所必需的。

IC693NIU004

IC693NIU004 is a 90-30 series programmable logic controller (PLC) module. Specifically, this is an Ethernet Network Interface Unit (NIU) primarily used to implement a distributed I/O architecture over the Ethernet, utilizing the Ethernet Global Data (EGD) protocol to exchange I/O data, and monitoring and controlling remote systems through simplex or fault-tolerant Ethernet topologies. IC693NIU004 is equipped with two (2) Ethernet communication interfaces, with automatic sensing and negotiation functions, supporting a transmission rate of 10/100 Mbps. These ports use one (1) IP address and therefore act as built-in Ethernet switches, which can be used for linear, star, and ring topologies. This module has the ability to handle up to 2048 discrete inputs (% I); 2048 discrete output (% Q); 1268 analog input words (% AI) and 512 analog output words (% AQ). In addition to these registers used for physical I/O, IC693NIU004 also has a built-in 4096 internal coil memory; 256 bit temporary output coil and 9999 register memory. This module supports interconnection of up to 8 substrates, including one (1) CPU substrate and seven (7) expansion and remote substrates. IC693NIU004 also supports Secure Real Time Transfer Protocol (SRTP) servers. IC693NIU004 comes with status LED indicators such as EOK, LAN, STAT, and PS ports. It also comes with an Ethernet restart button, which can be used to reinitialize the module without cutting off power or using programming software. The programming packages applicable to this module are CIMPLICITY Machine Edition Logic Developer 4.0, service pack 3, and Special 4 or higher.
The GE Fanuc IC693NIU004 Ethernet network interface provides a gateway for GE Fanuc series 90-30 programmable logic controllers to connect to the industrial Ethernet protocol through a built-in 10/100 Base-T/TX Ethernet switch. This Ethernet interface module is equipped with two RJ45 ports with automatic sensing function. Up to 2048 discrete inputs and 2048 discrete outputs can be connected, monitored, and controlled through Ethernet protocol. The GE Fanuc IC693NIU004 Ethernet network interface can also handle up to 1268 analog inputs and up to 512 analog outputs. With such high-speed and precise processing and data transmission capabilities, this Ethernet network interface module is an ideal choice for industrial applications that span a large number of field devices.
The operating temperature of the GE Fanuc IC693NIU004 Ethernet network interface should always be maintained between 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). When the module is exposed to temperatures above (or below) the rated temperature range for a long time, performance issues may occur. Environmental humidity should also be controlled, therefore it is recommended to install the GE Fanuc IC693NIU004 Ethernet interface in a protected distribution panel, preferably with climate control or forced air circulation. The installation of this device can only be carried out by appropriately trained technicians, and only qualified technicians can maintain, maintain, or repair modules. The configuration of the device is completed through CIMPLICITY Machine Edition Logic Developer software, which is necessary for basic activities such as assigning IP addresses and setting sublease parameters.