产品细节：IC693MDL930G 继电器输出模块

IC693MDL930是一个离散输出模块，是90-30系列可编程逻辑控制器(PLC)系列的一部分，以前由GE Fanuc制造，现在属于艾默生自动化。该模块是一个单槽宽、八(8)个单独隔离的常开(N.O .)触点，形成A输出，可与90-30系列模块化和嵌入式中央处理器(CPU)模块组件兼容使用，作为本地和分布式I/O组件。此外，该模块还支持现代RX3i和RX7i系统作为分布式输出模块。该模块适用于电机启动器、电磁驱动装置和指示灯。IC693MDL930触点输出的额定电流为4安培，每点电阻负载的最大值；每个点的先导工作负载为2安培，UL装置的每个模块为20安培，而模块的最小负载为10毫安。每个触点输出可在24 VDC和120 / 240 VDC的标称电压下工作，而工作电压范围为5-30 VDC / 5-250 VAC，频率为50/60 Hz。它还会产生5安培的最大浪涌电流，而最大通道响应时间为15 ms，适用于开和关信号转换。该模块的内部功耗为6 mA，所有输出来自背板上的5v总线，所有输出来自背板上的继电器24V总线，功耗为70 mA。通过独立隔离，每个输出通道可以在不同的电压下工作，从而提供最大的工作灵活性。模块的隔离额定值为现场侧和逻辑侧之间1500伏，通道之间500伏。

GE IC693MDL930模块是数字输出模块。IC693MDL930输出模块可安装在阿格发那科90-30 PLC系统的5槽或10槽背板的任何槽中。IC693MDL930模块有8个常开继电器电路，用于管理用户负载。单个模块输出的输出开关容量为4安培。每个模块输出都与其他模块输出隔离，并且每个模块输出都有自己的公共端子。IC693MDL930模块不包括任何保险丝。连接到模块输出的用户现场设备的电源需要由用户提供。显示每个输出点状态的LED指示灯位于模块的顶部。

IC693MDL930模块的额定电压为24伏DC或120至240伏交流电。工作电压为5至30伏DC或5至250伏交流电(50至60赫兹)。对于UL安装，峰值负载为每个输出4安培的电阻电流，每个输出2安培的先导工作电流，每个IC693MDL930模块最大20安培。最小负载为10毫安，最大浪涌电流为5安培。当PLC底板提供5伏DC电压时，模块消耗6毫安，当PLC底板提供24伏DC时，模块消耗70毫安。IC693MDL930模块的工作温度范围为0至50摄氏度。高于该阈值时，模块输出降额。对于开关感性负载，当使用抑制电路时，继电器触点寿命通常是电阻性负载触点寿命。

IC693MDL930G

IC693MDL930 is a discrete output module that is part of the 90-30 series of programmable logic controllers (PLCs). It was previously manufactured by GE Fanuc and is now part of Emerson Automation. This module is a single slot wide, eight (8) individually isolated normally open (N.O.) contacts that form an A output and are compatible with 90-30 series modular and embedded central processing unit (CPU) module components as local and distributed I/O components. In addition, this module also supports modern RX3i and RX7i systems as distributed output modules. This module is suitable for motor starters, electromagnetic drive devices, and indicator lights. The rated current output of IC693MDL930 contact is 4 amperes, the maximum value of the resistance load at each point; The lead working load at each point is 2 amperes, each module of the UL device is 20 amperes, and the minimum load of the module is 10 milliamperes. Each contact output can operate at nominal voltages of 24 VDC and 120/240 VDC, with a working voltage range of 5-30 VDC/5-250 VAC and a frequency of 50/60 Hz. It will also generate a maximum surge current of 5 amperes, with a maximum channel response time of 15 ms, suitable for switching on and off signals. The internal power consumption of this module is 6 mA, and all outputs come from the 5V bus on the backplane. All outputs come from the relay 24V bus on the backplane, with a power consumption of 70 mA. Through independent isolation, each output channel can operate at different voltages, providing maximum operational flexibility. The isolation rating of the module is 1500 volts between the field side and logic side, and 500 volts between channels.
The GE IC693MDL930 module is a digital output module. The IC693MDL930 output module can be installed in any slot of the Agfanaco 90-30 PLC system’s 5-slot or 10 slot backplane. The IC693MDL930 module has 8 normally open relay circuits for managing user loads. The output switch capacity of a single module is 4 amperes. Each module output is isolated from other module outputs, and each module output has its own common terminal. The IC693MDL930 module does not include any fuses. The power supply for the user’s on-site equipment connected to the module output needs to be provided by the user. The LED indicator lights that display the status of each output point are located at the top of the module.
The rated voltage of the IC693MDL930 module is 24 V DC or 120 to 240 V AC. The working voltage is 5 to 30 V DC or 5 to 250 V AC (50 to 60 Hz). For UL installation, the peak load is a resistor current of 4 amps per output, a lead operating current of 2 amps per output, and a maximum of 20 amps per IC693MDL930 module. The minimum load is 10 milliamperes, and the maximum surge current is 5 amperes. When the PLC motherboard provides a voltage of 5 volts DC, the module consumes 6 milliamperes, and when the PLC motherboard provides 24 volts DC, the module consumes 70 milliamperes. The operating temperature range of the IC693MDL930 module is from 0 to 50 degrees Celsius. When the threshold is exceeded, the module output is derated. For switch inductive loads, when using suppression circuits, the lifespan of relay contacts is usually that of resistive load contacts.