IC693MDL240 is a 120 volt AC input module from GE Fanuc. It is suitable for 90-30 series programmable logic controllers. This module has 16 input points and shares a common power input terminal. These 16 circuits are reactance inputs, they have a resistor and a capacitor. When the current flows into the input point, the reading in the input status table (% I) will be logic 1. The input module can be used in conjunction with a range of different input devices. For example, users can operate it using limit switches or buttons, as well as electronic proximity switches. To operate on-site equipment using GE Fanuc IC693MDL240, users must provide power. This module requires an AC power supply as it cannot use DC power. At the top of the module, there is a light-emitting diode. These indicate the on/off status of each corresponding input point. There are two rows on the LED block, each with eight green LEDs. The top row is marked as A1 for points 1 to 8. The bottom row is marked as B1 for points 9 to 16. This module has a hinged door. There is an insert between the inner and outer surfaces of the door. When the door is closed, there is circuit wiring information on the surface facing inward. On the outer surface, information about circuit recognition can be recorded. This is a high-voltage module, as indicated by the red code on the outer left edge of the plugin. This module is compatible with the 90-30 series PLC system, so users can install it in any I/O slot of the 5-slot or 10 slot backplane.

我司主营品牌