产品详情：IC693CHS397E 5插槽CPU基板

IC693CHS397是90-30系列可编程逻辑控制器(PLC)系列的5插槽底板。在产品系列的活跃生命周期中，该硬件是通用电气发那科自动化的一部分，然而，PLC系列和其他产品最近被艾默生自动化收购。IC693CHS397总共有五(5)个插槽和另一个未计数的专用于电源模块的插槽。该基板有一(1)个专用于中央处理器(CPU)或专用模块的插槽，四(4)个分配给I/O和可选模块的插槽。它还在硬件的最右侧提供了一个扩展槽，可用于机架扩展。该基板上只允许安装一(1)个CPU。此外，用于CPU的相同插槽(插槽1)也设计为与通信模块兼容，例如FIP远程I/O扫描仪和类似模块。插槽2和其他I/O插槽具有独特的尺寸，不适合任何其他模块。这提供了连接安全性，并防止在安装过程中损坏其他模块。所提供的底板扩展端口是一个25针D型外壳母连接器，安装在硬件的最右侧。当连接扩展电缆或安装多个扩展基板时，确保电缆的总长度不超过50英尺或15米。IC693CHS397设计用于通过提供的安装片进行面板安装。该硬件的尺寸为10.43 x 5.12 x 5.59英寸。(宽x高x深)在5伏直流电下内部功耗为270毫安。

GE Fanuc IC693CHS397 5插槽底板来自GE Fanuc系列90-30，用于托管模块化CPU或中央处理器、I/O和专用模块。IC693CHS397基板有5个插槽，用于安装构成完整PLC或可编程逻辑控制器的各种CPU和其他设备。从技术上来说，GE Fanuc IC693CHS397基板总共有6个插槽，而不仅仅是5个，但左边的第一个插槽没有编号，因为它总是且仅用于托管电源模块。此电源插槽的大小和形状与编号的5个插槽不同，其大小和形状只能容纳一个电源，不能容纳其他任何东西。

GE Fanuc系列90-30 IC693CHS397 5插槽CPU基板中的5个主插槽包括1个CPU插槽(这是基板的名称)和4个非CPU插槽(可容纳I/O模块)。IC693CHS397基板的最右侧边缘还有一个I/O扩展总线连接器，可用于扩展基板的I/O通信能力，使其超出4个I/O插槽的处理能力。扩展基板和远程基板可以作为大型PLC系统的一部分连接到IC693CHS397 CPU基板，但一个PLC中只能有一个CPU基板。CPU基板总是安装在PLC系统的0号机架上。由于IC693CHS397 CPU基板支持模块化CPU，因此在必要时可以轻松更换或升级CPU模块。

IC693CHS397E

IC693CHS397 is a 5-slot backplane of the 90-30 series programmable logic controller (PLC) series. In the active lifecycle of the product line, this hardware is part of General Electric Fanuc Automation, however, the PLC series and other products have recently been acquired by Emerson Automation. IC693CHS397 has a total of five (5) slots and another uncounted slot dedicated to power modules. This substrate has one (1) slot dedicated to the central processing unit (CPU) or dedicated modules, and four (4) slots allocated to I/O and optional modules. It also provides an expansion slot on the far right side of the hardware, which can be used for rack expansion. Only one (1) CPU is allowed to be installed on this substrate. In addition, the same slot (slot 1) used for CPUs is also designed to be compatible with communication modules, such as FIP remote I/O scanners and similar modules. Slot 2 and other I/O slots have unique dimensions and are not suitable for any other module. This provides connection security and prevents damage to other modules during installation. The provided backplane expansion port is a 25 pin D-type female connector, installed on the far right side of the hardware. When connecting expansion cables or installing multiple expansion substrates, ensure that the total length of the cables does not exceed 50 feet or 15 meters. IC693CHS397 is designed for panel installation through the provided mounting pads. The size of this hardware is 10.43 x 5.12 x 5.59 inches. The internal power consumption (width x height x depth) is 270 milliamperes at 5 volts DC.
The GE Fanuc IC693CHS397 5-slot backplane comes from the GE Fanuc series 90-30 and is used to host modular CPUs or central processing units, I/O, and dedicated modules. The IC693CHS397 substrate has 5 slots for installing various CPUs and other devices that make up a complete PLC or programmable logic controller. Technically speaking, the GE Fanuc IC693CHS397 substrate has a total of 6 slots, not just 5, but the first slot on the left is not numbered because it is always and only used to host power modules. The size and shape of this power slot are different from the 5 numbered slots. It can only accommodate one power supply and cannot accommodate anything else.
The 5 main slots in the GE Fanuc series 90-30 IC693CHS397 5-slot CPU substrate include 1 CPU slot (which is the name of the substrate) and 4 non CPU slots (which can accommodate I/O modules). There is also an I/O expansion bus connector on the far right edge of the IC693CHS397 substrate, which can be used to expand the I/O communication capability of the substrate beyond the processing capacity of four I/O slots. Expansion and remote substrates can be connected to the IC693CHS397 CPU substrate as part of a large PLC system, but there can only be one CPU substrate in a PLC. The CPU substrate is always installed on rack 0 of the PLC system. Due to the support for modular CPUs on the IC693CHS397 CPU substrate, CPU modules can be easily replaced or upgraded when necessary.