产品详情：IC693CHS391E/G 模块化CPU基板

IC693CHS391是一款模块化CPU基板。该基板是GE Fanuc制造的90-30系列的一部分。该设备包含连接端口，允许安装模块化CPU、I/O模块和电源模块。它总共有十(10)个插槽，其中一(1)个插槽分配给CPU，九(9)个插槽用于I/O模块。电源插槽和总线扩展端口不包括在插槽计数中。

由于这是一个模块化CPU插槽，因此默认情况下，它被分配了一个节点地址0，该地址可以通过编程软件进行修改。一个系统仅支持一(1)个模块化CPU插槽。系统中的其他插槽可以是扩展或远程I/O基板。

电源安装在最左侧的插槽中，该插槽不包括在插槽计数中，允许该基板支持更多的I/O。CPU仅安装在插槽1中，因为该插槽是专门为CPU连接或特殊选项模块(如FIP总线远程I/O扫描仪)设计的。2号及以上的插槽是专门为I/O或选件模块设计的。扩展或远程I/O基板通过基板最右侧的扩展端口连接。根据IC693CHS391承载的CPU，IC693CHS391模块化CPU基板最多支持四(4)个或七(7)个扩展基板。该基板仅支持面板安装，通过提供的安装孔用螺钉和垫圈固定。

IC693CHS391基板是阿格Fanuc制造的扩展基板，配有10个插槽。它的额定电流为420毫安，额定电压为5伏DC。它配有一个双列直插式开关。扩展底板与90-30系列PLC以及其他模块相连。电源模块插入底板的左侧插槽。IC693CHS391基板为模块化尺寸，具有开放式外壳。如果需要额外的功能，它可以很容易地安装和更换或更换为不同的类型。板的左侧有一个电源端口，以及CPU和非CPU插槽的连接插槽。右手边还有一个25针母接头，用于连接扩展和远程基板。

为了与远程基板连接，IC693CHS391扩展基板需要长度小于700英尺的电缆。基板不能作为单一实体使用。它可以连接到PLC设备或使用PCI卡的个人计算机。根据所用CPU的型号，它一次最多可以连接7个CPU。IC693CHS391基板可以垂直或水平安装，具体取决于PLC或CPU的布局。环境温度应始终在规定的范围内。该板应远离水溅和灰尘、污垢和有害化学物质的来源。IC693CHS391基板通过了多项全球环境和工业标准认证。

IC693CHS391E/G

IC693CHS391 is a modular CPU substrate. This substrate is part of the 90-30 series manufactured by GE Fanuc. This device includes connection ports that allow for the installation of modular CPUs, I/O modules, and power modules. It has a total of ten (10) slots, with one (1) slot allocated to the CPU and nine (9) slots for I/O modules. Power slots and bus expansion ports are not included in the slot count.
As this is a modular CPU slot, it is assigned a node address of 0 by default, which can be modified through programming software. A system only supports one (1) modular CPU slot. Other slots in the system can be expansion or remote I/O substrates.
The power supply is installed in the leftmost slot, which is not included in the slot count and allows the substrate to support more I/O. The CPU is only installed in slot 1, as it is specifically designed for CPU connection or special option modules (such as FIP bus remote I/O scanners). Slots 2 and above are specifically designed for I/O or optional modules. The expansion or remote I/O board is connected through the expansion port on the far right side of the board. According to the CPU carried by IC693CHS391, the IC693CHS391 modular CPU substrate supports a maximum of four (4) or seven (7) expansion substrates. This substrate only supports panel installation and is fixed with screws and washers through the provided mounting holes.
The IC693CHS391 substrate is an expansion substrate manufactured by Agfanuc, equipped with 10 slots. Its rated current is 420 milliamperes and rated voltage is 5 volts DC. It is equipped with a dual inline switch. The expansion board is connected to the 90-30 series PLC and other modules. Insert the power module into the left slot of the motherboard. The IC693CHS391 substrate is modular in size and has an open housing. If additional features are required, it can be easily installed and replaced or replaced with a different type. There is a power port on the left side of the board, as well as a connection slot for CPU and non CPU slots. On the right-hand side, there is also a 25 pin female connector for connecting expansion and remote substrates.
In order to connect to the remote substrate, the IC693CHS391 expansion substrate requires cables with a length of less than 700 feet. The substrate cannot be used as a single entity. It can be connected to PLC devices or personal computers using PCI cards. According to the model of the CPU used, it can connect up to 7 CPUs at a time. The IC693CHS391 substrate can be installed vertically or horizontally, depending on the layout of the PLC or CPU. The ambient temperature should always be within the specified range. The board should be kept away from sources of water splashes, dust, dirt, and harmful chemicals. The IC693CHS391 substrate has passed multiple global environmental and industrial standard certifications.