IC693BEM331 is the Genius bus controller in the 90-30 series PLC system produced by GE Fanuc. This controller provides an interface for the serial bus of the 90-30 series PLC and Genius I/O, capable of sending and receiving up to 128 bytes of control data for a total of 31 devices on the Genius I/O bus. As a Genius bus controller, IC693BEM331 requires input and output data length configurations suitable for I/O devices to ensure data transmission. IC693BEM331 GBC is not included in the fault table configuration error of 90-70 GBC. The most effective way to check the configuration of Genius devices is to verify whether the corresponding GBC device presence bit is set to 1. Some uses of this Genius bus controller include: Genius modules: designed to provide interfaces for a large number of discrete, analog, and specialized field devices. Important note: Genius blocks cannot be controlled by GCM and GCM+modules. Remote drop: 90-70 series I/O rack with bus interface through remote I/O scanner module. Any combination of 90-70 series discrete and analog I/O modules is compatible with these drops, providing up to 128 bytes of input and output data. Field control I/O station: composed of up to eight additional field control modules and one bus interface unit (BIU). BIU provides I/O scanning, intelligent processing, and functional configuration for I/O stations. Genius handheld display (HHM): A portable device that can also be permanently installed. These devices provide a comfortable operating interface for module setup, diagnosis, and data monitoring. Multi host: used for communication using global data and datagrams.

〖可立即发货〗IC693BEM331K Genius总线控制器