产品详情：IC693BEM331D 总线控制器模块

IC693BEM331是总线控制器模块，是通用席瑞斯90-30可编程逻辑控制器(PLC)产品系列的一部分。该模块由GE Fanuc Automation制造，用于将90-30系列PLC连接到专有的Genius I/O总线。该总线控制器模块能够与Genius模块通信，例如离散、模拟和特殊用途现场设备。它还支持与远程I/O分支的通信，远程I/O分支包括通过远程I/O扫描仪模块连接的90-70系列I/O机架、通过总线接口单元的现场控制I/O站(其中最多支持八(8)个附加现场控制模块)、Genius手持监视器和各种主机。

90-30系列PLC系统最多可安装八(8)个Genius总线控制器或增强型Genius通信模块。为了实现这种配置，90-30系列PLC所需的固件为固件5.0或更高版本。

IC693BEM331配备了安装在模块前面板上的各种状态led。这些指示灯包括正常和通信指示灯。“正常”指示灯的正常运行是稳定的亮起状态。通电诊断完成后，此指示灯保持亮起。当总线控制器模块主动通信时，COM LED稳定亮起，并在出现间歇性总线连接和错误时闪烁。

与IC693BEM331总线控制器一起使用的兼容系列90-30 PLC是IC693CPU311K、321K、331L或更高版本，以及IC693CPU313、323、340、341、350、351、352、360、363和364的任何版本。需要使用的固件版本为5.0或更高版本。

GE Fanuc IC693BEM331总线控制器能够处理总线上来自现场设备的最多128字节的输入和输出数据。GE Fanuc IC693BEM331总线控制器的配置是通过一个额外的专有GE Fanuc手持监视器完成的。可以向使用GE Fanuc IC693BEM331总线控制器作为通信接口的90-30系列PLC发送和接收数据的一些I/O设备类型包括离散I/O设备，如电磁阀、电机启动器和限位开关，或模拟I/O设备，如压力变送器和温度传感器。制造商建议将GE Fanuc IC693BEM331总线控制器安装在保护性外壳内，以避免直接接触水、过高的湿度以及极高和极低的温度。任何需要对电路进行维护的工作只能由有资格的人员进行，因为设备操作不当或任何线路连接不正确都会导致应用程序故障、财产损失或严重伤害。

IC693BEM331D

IC693BEM331 is a bus controller module and is part of the Universal Sirius 90-30 Programmable Logic Controller (PLC) product line. This module is manufactured by GE Fanuc Automation and is used to connect the 90-30 series PLC to the proprietary Genius I/O bus. This bus controller module can communicate with Genius modules, such as discrete, analog, and special purpose field devices. It also supports communication with remote I/O branches, which include 90-70 series I/O racks connected through remote I/O scanner modules, field control I/O stations through bus interface units (with up to eight (8) additional field control modules supported), Genius handheld monitors, and various hosts.
The 90-30 series PLC system can install up to eight (8) Genius bus controllers or enhanced Genius communication modules. To achieve this configuration, the firmware required for the 90-30 series PLC is firmware 5.0 or higher.
IC693BEM331 is equipped with various status LEDs installed on the module front panel. These indicator lights include normal and communication indicator lights. The normal operation of the “normal” indicator light is in a stable on state. After the power on diagnosis is completed, this indicator light remains on. When the bus controller module actively communicates, the COM LED lights up steadily and flashes when intermittent bus connections and errors occur.
The compatible series 90-30 PLC used with the IC693BEM331 bus controller is IC693CPU311K, 321K, 331L or higher, as well as any version of IC693CPU313, 323, 340, 341, 350, 351, 352, 360, 363, and 364. The required firmware version is 5.0 or higher.
The GE Fanuc IC693BEM331 bus controller is capable of processing up to 128 bytes of input and output data from field devices on the bus. The configuration of the GE Fanuc IC693BEM331 bus controller is achieved through an additional proprietary GE Fanuc handheld monitor. Some types of I/O devices that can send and receive data to the 90-30 series PLC using the GE Fanuc IC693BEM331 bus controller as a communication interface include discrete I/O devices such as solenoid valves, motor starters, and limit switches, or analog I/O devices such as pressure transmitters and temperature sensors. The manufacturer recommends installing the GE Fanuc IC693BEM331 bus controller in a protective enclosure to avoid direct contact with water, high humidity, and extremely high and low temperatures. Any work that requires maintenance of the circuit can only be carried out by qualified personnel, as improper equipment operation or incorrect wiring connections can lead to application failures, property damage, or serious injury.