产品详情：IC693ALG392C 模拟输出模块

IC693ALG392是一个90-30系列模块。该模块是一个模拟输出模块，通常用于实现仪器或设备的调制控制，如变频驱动器(VFD)、控制阀、定位器、转换器和其他类似的调制设备。它还可以用于将模拟数据重新传输到接收元件，如记录器、数据记录器和其他兼容的接收设备。

IC693ALG392具有8个输出通道，分辨率可配置为15或16位，具体取决于所选的模拟输出范围。它能够提供电压信号，如0至+10伏(单极)/ -10至+10伏(双极)电压和0至20毫安/ 4至20毫安输出信号。为了能够产生输出模拟信号，该模块需要一个隔离的24VDC电源，直接连接到模块的指定端子板。

该模块经过工厂校准。校准信息包括0至20毫安时的0.625安；4至20毫安时为0.5安；电压为0.3125毫伏(每计数)。模块的每个通道显示8毫秒的更新速率，分辨率为0.5 A (1 LSB = 0.5 A)，电流为4-20mA；0-20毫安时为0.625安(1 LSB = 0.625安)；0-10VDC输出信号为0.3125 mV (1 LSB = 0.3125 mV)，而-10至+10VDC输出信号为0.3125 mV (1 LSB = 0.3125 mV)。

该模块可安装在RX3i机箱的任何插槽中。每个RX3i机架允许的实例数量没有限制。实例的数量取决于特定RX3i控制器支持的模拟数据的数量。

IC693ALG392C

IC693ALG392 is a 90-30 series module. This module is an analog output module commonly used for modulation control of instruments or equipment, such as variable frequency drives (VFDs), control valves, positioners, converters, and other similar modulation devices. It can also be used to retransmit analog data to receiving components such as recorders, data recorders, and other compatible receiving devices.
IC693ALG392 has 8 output channels and can be configured with a resolution of 15 or 16 bits, depending on the selected analog output range. It can provide voltage signals such as 0 to+10V (single pole)/-10 to+10V (bipolar) voltage and 0 to 20mA/4 to 20mA output signals. In order to generate an output analog signal, the module requires an isolated 24VDC power supply that is directly connected to the designated terminal board of the module.
This module has been factory calibrated. Calibration information includes 0.625 amperes at 0 to 20 milliamperes; 0.5 A at 4 to 20 mA; The voltage is 0.3125 millivolts (per count). Each channel of the module displays an update rate of 8 milliseconds, with a resolution of 0.5 A (1 LSB=0.5 A) and a current of 4-20mA; 0.625A at 0-20mA (1 LSB=0.625A); The 0-10VDC output signal is 0.3125 mV (1 LSB=0.3125 mV), while the -10 to+10VDC output signal is 0.3125 mV (1 LSB=0.3125 mV).
This module can be installed in any slot of the RX3i chassis. There is no limit to the number of instances allowed per RX3i rack. The number of instances depends on the amount of simulated data supported by a specific RX3i controller.