IC670GBI002是现场控制系统系列的总线接口单元(BUI)。该BUI支持Genius总线协议，并支持托管多达八(8)个现场I/O模块。BUI管理现场I/O模块与驻留在Genius总线上的主控制器主机之间的数据交换。IC670GBI002总线接口单元最多可容纳128字节的输入数据和128字节的输出数据。

IC670GBI002安装在适当的终端基座上。它设计安装在DIN导轨上，DIN导轨组件连接到接地系统。这样，确保DIN导轨材料由良好或优异的导体制成，不易受到氧化和腐蚀的影响。

IC670GBI002由18-30 VDC的外部电源电压供电，标称值为24 VDC。它的功耗为16.8瓦，浪涌电流为15-50 A(峰值)，最大持续时间为3 ms。它的电源输出为6.5 VDC，最大电流为1.4安培，保持时间为10 mS。输出电压和电流通过BUI背板传送到托管模块。

IC670GBI002的可靠性为183，000小时的平均无故障运行时间(MTBF)。它配有用于电源和通信连接的端子板，以及用于与下一个端子板建立连接的I/O端子。除了冗余CPU组件之外，如果安装了适当的现场I/O模块版本，它还可用于热移除和插入要求。

IC670GBI002接口是GE Fanuc公司生产的现场控制总线接口单元。该装置通过现场控制产品系列提供，符合UL和CE标准。一般来说，该装置用于非危险场所，如果在危险区域使用，必须对其进行充分保护。该部件也符合FCC规则，其工作环境温度不低于0摄氏度(32华氏度)且不高于55摄氏度(131华氏度)。IC670GBI002总线接口单元具有20毫秒(最大值)的保持时间、3毫秒(最大值)20安培(峰值)的浪涌电流、115伏交流电48伏安培的额定功耗和125伏交流电24瓦的额定功耗等特性。

现场控制IC670GBI002总线接口单元与版本为4.6或更高版本的Genius手持监视器以及各种主机系统设备兼容。该装置还可以与90-30系列、90-70系列、6系列或5系列的可编程逻辑控制器完美配合。该装置的工作频率为47至63赫兹，输入电压为90至135伏交流电或105至150伏DC。相关接线盒所需的典型功率为16毫安。IC670GBI002总线接口单元安装在尺寸至少为108毫米(4.25英寸)的标准DIN导轨上，并且由于出色的设计特性，该单元的移除得以简化。总线接口装置接受AWG #14线规，必要时支持通信总线的使用。

IC670GBI002H

IC670GBI002 is a bus interface unit (BUI) in the field control system series. This BUI supports the Genius bus protocol and supports hosting up to eight (8) field I/O modules. BUI manages the data exchange between on-site I/O modules and the main controller host residing on the Genius bus. The IC670GBI002 bus interface unit can accommodate up to 128 bytes of input data and 128 bytes of output data.
IC670GBI002 is installed on an appropriate terminal base. It is designed to be installed on DIN rails, with DIN rail components connected to the grounding system. This ensures that the DIN rail material is made of good or excellent conductors and is not easily affected by oxidation and corrosion.
IC670GBI002 is powered by an external power supply voltage of 18-30 VDC, with a nominal value of 24 VDC. Its power consumption is 16.8 watts, surge current is 15-50 A (peak), and maximum duration is 3 ms. Its power output is 6.5 VDC, with a maximum current of 1.4 amperes and a holding time of 10 mS. The output voltage and current are transmitted to the custody module through the BUI backplane.
The reliability of IC670GBI002 is an average time between failures (MTBF) of 183000 hours. It is equipped with terminal blocks for power and communication connections, as well as I/O terminals for establishing connections with the next terminal block. In addition to redundant CPU components, it can also be used for hot removal and insertion requirements if an appropriate on-site I/O module version is installed.
The IC670GBI002 interface is a field control bus interface unit produced by GE Fanuc. This device is provided through on-site control of the product series and complies with UL and CE standards. Generally speaking, this device is used in non hazardous areas and must be adequately protected if used in hazardous areas. This component also complies with FCC regulations and operates in an ambient temperature not lower than 0 degrees Celsius (32 degrees Fahrenheit) and not higher than 55 degrees Celsius (131 degrees Fahrenheit). The IC670GBI002 bus interface unit has characteristics such as a holding time of 20 milliseconds (maximum), a surge current of 20 amperes (peak) of 3 milliseconds (maximum), a rated power consumption of 48 volt amperes at 115 volts AC, and a rated power consumption of 24 watts at 125 volts AC.
The on-site control IC670GBI002 bus interface unit is compatible with Genius handheld monitors of version 4.6 or higher, as well as various host system devices. This device can also be perfectly matched with programmable logic controllers of the 90-30 series, 90-70 series, 6 series, or 5 series. The operating frequency of the device is 47 to 63 Hz, and the input voltage is 90 to 135 volts AC or 105 to 150 volts DC. The typical power required for the relevant junction box is 16 milliamperes. The IC670GBI002 bus interface unit is installed on a standard DIN rail with a minimum size of 108 millimeters (4.25 inches), and its removal is simplified due to its excellent design features. The bus interface device accepts AWG # 14 wire gauge and supports the use of communication buses when necessary.