产品详情：IC660BRD025 Genius模块化冗余接收输出模块

GE Fanuc IC660BRD025 Genius模块化冗余接收输出模块是一个32点离散输出DC模块，用于控制离散输出负载的GMR输出子系统。IC660BRD025输出模块用于H模块冗余输出组配置。H块输出组由4个输出块组成(2个源块和2个接收器类型块),该配置是GMR输出子系统的输出组配置之一，包括T块冗余输出组、I块冗余输出组和1选1诊断块冗余输出组。在H模块配置中，两个IC660BRD025吸电流输出模块并联在每个负载的一侧，两个源输出模块并联在负载的另一侧。

IC660BRD025吸收输出模块有32个输出点，集成了阻塞二极管和反馈电阻。这些二极管和反馈电阻有助于简化系统布线，并通过防止反向驱动电流引起的故障来提高系统可靠性。IC660BRD025吸收输出模块的额定工作电压为5、12或24伏DC，工作负载电流范围为0.5安培至1.0安培。它的最大浪涌电流为4.0安培，输出关断状态泄漏电流为20微安。IC660BRD025吸收输出模块通过使用Genius I/O手持监视器配置为GMR模式，并安装在配置为匹配GMR设置的总线上。与使用GMR软件配置进行投票的输入子系统不同，GMR输出组通过比较从PLC接收的32个点的输出数据来进行投票。

IC660BRD025

The GE Fanuc IC660BRD025 Genius Modular Redundant Receiver Output Module is a 32 point discrete output DC module used to control the GMR output subsystem of discrete output loads. The IC660BRD025 output module is used for redundant output group configuration of the H module. The H-block output group consists of 4 output blocks (2 source blocks and 2 receiver type blocks). This configuration is one of the output group configurations of the GMR output subsystem, including T-block redundant output group, I-block redundant output group, and 1-to-1 diagnostic block redundant output group. In the H module configuration, two IC660BRD025 current absorbing output modules are connected in parallel on one side of each load, and two source output modules are connected in parallel on the other side of the load.
The IC660BRD025 absorption output module has 32 output points and integrates blocking diodes and feedback resistors. These diodes and feedback resistors help simplify system wiring and improve system reliability by preventing faults caused by reverse drive currents. The rated working voltage of the IC660BRD025 absorption output module is 5, 12, or 24 volts DC, and the working load current range is 0.5 amperes to 1.0 amperes. Its maximum surge current is 4.0 amperes, and its output leakage current in the off state is 20 microamperes. The IC660BRD025 absorption output module is configured to GMR mode using Genius I/O handheld monitors and installed on the bus configured to match GMR settings. Unlike the input subsystem configured with GMR software for voting, the GMR output group votes by comparing the output data of 32 points received from the PLC.