产品细节：IC200MDL750G 高密度数字输出模块

IC200MDL750是一种高密度数字输出模块，由艾默生自动化公司制造，前身为通用电气智能平台公司(GE IP)。该模块的主要特点是有32个输出通道，分为两组，每组16个输出通道。该模块通常用于启动或激励电负载，例如螺线管启动装置、继电器线圈、指示灯和其它仅具有双态操作的装置，特别是双态或开和关。由于IC200MDL750的标称电压输出为12 / 24 VDC，输出电压范围为10.2 – 30 VDC，每个通道的输出电流为0.5 A，因此它与24 VDC额定设备兼容使用。

IC200MDL750是VersaMax I/O平台的一部分，旨在用作分布式I/O架构的组件模块。它需要使用承载用于模块的接线端子的载体底座。有了载体底座，模块可以水平或垂直方向安装到标准35 mm DIN导轨上。

IC200MDL750的物理尺寸为110毫米(4.3英寸)x 66.8毫米(2.63英寸)x 50毫米(1.956英寸)，不包括托架底座的尺寸。与其他I/O模块类似，每个输出通道都配有单独的LED状态指示器，用于本地监控每个通道的模块活动。此外，还提供了一个OK LED，表示背板的有效电源，最大值为90 mA。

IC200MDL750模块是Versamax输出模块。它是一个32点输出模块，额定电压为24伏DC。它带有每点0.5安培的额定电流。它消耗90毫安的背板电流。它体积小巧，重量为0.90千克。IC200MDL750模块是一个正逻辑输出模块，有2组16个输出。32个总输出有一个DC+端子和一个DC-端子。当接线与感性负载连接时，输出模块使用外部抑制电路。该模块经认证可在I级2区额定危险场所运行。

这些模块具有通道led，当现场电源存在时，这些led会亮起。这些通道的开启响应时间最长为0.2毫秒，关闭响应时间最长为1毫秒。在30伏DC下，IC200MDL750模块的输出泄漏电流为0.5毫安。使用DIN导轨可以轻松安装输出模块。模块的温度应保持在0到30摄氏度之间，以避免热降额。一次可以操作的点数取决于环境温度和模块的方向。

IC200MDL750G

IC200MDL750 is a high-density digital output module manufactured by Emerson Automation, formerly known as General Electric Intelligent Platforms (GE IP). The main feature of this module is that it has 32 output channels, divided into two groups, each with 16 output channels. This module is typically used to start or excite electrical loads, such as solenoid starting devices, relay coils, indicator lights, and other devices that only have dual mode operation, especially dual mode or on and off. Due to the nominal voltage output of IC200MDL750 being 12/24 VDC, with an output voltage range of 10.2-30 VDC and an output current of 0.5 A per channel, it is compatible with 24 VDC rated equipment.
IC200MDL750 is a part of the VersaMax I/O platform designed as a component module for distributed I/O architecture. It requires the use of a carrier base that carries the wiring terminals used for the module. With a carrier base, modules can be installed horizontally or vertically on standard 35mm DIN rails.
The physical dimensions of IC200MDL750 are 110 millimeters (4.3 inches) x 66.8 millimeters (2.63 inches) x 50 millimeters (1.956 inches), excluding the dimensions of the bracket base. Similar to other I/O modules, each output channel is equipped with a separate LED status indicator for local monitoring of module activity for each channel. In addition, an OK LED is provided to indicate the effective power supply of the backplane, with a maximum value of 90 mA.
The IC200MDL750 module is a Versamax output module. It is a 32 point output module with a rated voltage of 24 volts DC. It has a rated current of 0.5 amperes per point. It consumes 90 milliamperes of backplane current. It is compact in size and weighs 0.90 kilograms. The IC200MDL750 module is a positive logic output module with 2 sets of 16 outputs. 32 total outputs have one DC+terminal and one DC – terminal. When the wiring is connected to an inductive load, the output module uses an external suppression circuit. This module is certified to operate in Class I, Zone 2 rated hazardous locations.
These modules have channel LEDs that light up when the on-site power supply is present. The maximum response time for opening these channels is 0.2 milliseconds, and the maximum response time for closing them is 1 millisecond. At 30 volts DC, the output leakage current of the IC200MDL750 module is 0.5 milliamperes. The output module can be easily installed using DIN rails. The temperature of the module should be maintained between 0 and 30 degrees Celsius to avoid thermal derating. The number of points that can be operated at once depends on the ambient temperature and the direction of the module.

热卖：IC200MDL750G 高密度数字输出模块