产品细节：IC200BEM002 网络通信模块

IC200BEM002模块是一个网络通信模块，网络数据速率在9.6 K波特和12 M波特之间。它是Versamax系列的一部分，由GE Fanuc制造。在不使用中继器的情况下，它最多支持32个站，在使用中继器的情况下，最多支持125个站。模块的I/O数据使用384字节的数据。模块连接器是一种9针D型子连接器。它消耗来自5伏总线的总共460毫安的电流。在给定时间，网络模块可以处理来自网络的244字节的数据，并推送高达244字节的输出数据。通信模块使用1.00版固件。它配备了闪存，可以通过连接个人电脑和使用串行端口轻松升级。IC200BEM002模块可以使用DIN导轨安装。

在安装过程中，GE Fanuc IC200BEM002模块应处于解锁位置，连接器应对齐并卡入到位。模块正面有一个显示模块电源状态的电源LED指示灯和一个显示通信状态的“COM”LED指示灯。对于连接，它使用Profibus DP电缆。通信模块的额定阻抗在135和165欧姆之间。模块的线规小于0.64毫米。IC200BEM002模块采用开放式外壳设计，仅可用于室内。通信模块不应靠近热源。

IC200BEM002

The IC200BEM002 module is a network communication module with a network data rate between 9.6 K baud and 12 M baud. It is part of the Versamax series and manufactured by GE Fanuc. It supports up to 32 stations without using a repeater, and up to 125 stations with a repeater. The I/O data of the module uses 384 bytes of data. The module connector is a 9-pin D-type sub connector. It consumes a total of 460 milliamperes of current from the 5 volt bus. At a given time, the network module can process 244 bytes of data from the network and push up to 244 bytes of output data. The communication module uses version 1.00 firmware. It is equipped with flash memory and can be easily upgraded by connecting to a personal computer and using a serial port. The IC200BEM002 module can be installed using DIN rails.
During the installation process, the GE Fanuc IC200BEM002 module should be in the unlocked position, and the connectors should be aligned and snap into place. On the front of the module, there is a power LED indicating the power status of the module and a “COM” LED indicating the communication status. For connection, it uses a Profibus DP cable. The rated impedance of the communication module is between 135 and 165 ohms. The wire gauge of the module is less than 0.64 millimeters. The IC200BEM002 module adopts an open shell design and can only be used indoors. The communication module should not be close to the heat source.