✕
bethemestore2-header-icon4

主营世界知名品牌的PLC,DCS系统备件,模块卡件控制器,各种冷门停产型号

FP-TB-1 16–26 AWG,端子底座

FP-TB-1 16–26 AWG,端子底座 FP-TB-1
这FP-TB-1是螺钉端子类型FieldPoint终端基座有36个频道。这FP-TB-1兼容除双通道模块之外的任何FieldPoint I/O模块。这终端基座可以提供与螺丝端子的方便的现场接线连接。这个终端底座的制造商是美国国家仪器公司。根据零件号,可以很容易地接触到端子座777519-01。这镍FP-TB-1可用于除双通道模块之外的任何FieldPoint模块。
  • 电话/Phone:15359458915 (微信同号)
  • 邮箱/Email:sales@fyplc.cn
  • 地址:漳州市龙文区朝阳北路1号办公楼205

 ★一手货源,没有中间商赚差价!库存1个亿!

★只要是您想要的,我能帮您找到,价格最优!

★厂家原装,保证售后服务,所有产品质保1年!

产品详细说明

这FP-TB-1是螺钉端子类型FieldPoint终端基座有36个频道。这FP-TB-1兼容除双通道模块之外的任何FieldPoint I/O模块。这终端基座可以提供与螺丝端子的方便的现场接线连接。这个终端底座的制造商是美国国家仪器公司。根据零件号,可以很容易地接触到端子座777519-01。这镍FP-TB-1可用于除双通道模块之外的任何FieldPoint模块。

这FP-TB-1可以夹住、锁定并安装到面板或DIN导轨上。但是,在安装网络模块之前,请记住,对于任何电源,其电源都不应处于活动状态。这NI FP–TB–1有36个通道,其中4个是专用通道端子,32个编号端子由I/O模块定义。终端基座的专用信道终端的一半是V信道,而剩余的是C信道。这些端子的最大电流应限制在10 A以下,如果电流低于3 A,可以使用单个端子作为回路。NI设备的最大工作电压为250 V(通道对地,CAT II)

热梯度存在于FP-TB-1由于多种原因,如冷热气流、热电偶导线以及相邻模块产生的热量。这NI FP–TB–1端子接线由7 mm绝缘层的铜导线制成,采用标准16-26 AWG,从端部剥离。通常使用铜线,除非使用需要不同材料的热电偶等传感仪器。

FP-TB-1 16–26

This FP-TB-1 is a screw terminal type FieldPoint terminal base with 36 channels. This FP-TB-1 is compatible with any FieldPoint I/O module except for dual channel modules. This terminal base can provide convenient on-site wiring connections with screw terminals. The manufacturer of this terminal base is National Instruments Corporation of the United States. According to the part number, the terminal block 777519-01 can be easily accessed. This nickel FP-TB-1 can be used for any FieldPoint module except for dual channel modules. This FP-TB-1 can be clamped, locked, and installed on the panel or DIN rail. However, before installing the network module, please remember that the power supply should not be active for any power source. This NI FP-TB-1 has 36 channels, of which 4 are dedicated channel terminals and 32 numbered terminals are defined by the I/O module. Half of the dedicated channel terminals on the terminal base are V channels, while the remaining are C channels. The maximum current of these terminals should be limited to 10 A or less. If the current is below 3 A, a single terminal can be used as a circuit. The maximum operating voltage of NI equipment is 250 V (channel to ground, CAT II) Thermal gradients exist in FP-TB-1 for various reasons, such as hot and cold airflow, thermocouple wires, and heat generated by adjacent modules. This NI FP-TB-1 terminal wiring is made of copper wire with a 7mm insulation layer, using standard 16-26 AWG, stripped from the end. Copper wire is usually used, unless sensing instruments such as thermocouples that require different materials are used.

我司主营品牌

ABB系统备件 FOXBORO卡件模块 MOTOROLA系统控制模块
Allen-Bradley PLC模块 GE PLC模块备件 NI系统模块卡件
ALSTOM 控制面板 HIMA模块卡件 Other杂牌卡件模块
AMAT HONEYWELL模块卡件 PROSOFT 网络接口模块
B&R模块 ICS TRIPLEX 模块卡件 SCHNEIDER CPU模块
Bently卡件 KOLLMORGEN驱动 TRICONEX卡件模块
EMERSON 系统模块卡件 KUKA 机器人配件 VMIC系列卡件
Enterasys 交换机 METSO备件 Woodward 调速器
EPRO 模块 MOOG控制器模块 XYCOM 卡件特价销售
FANUC伺服驱动模块 Moore系统模块 YOKOGAWA安全系统模块

免责声明:

漳州风云电气设备有限公司我们销售新产品和停产产品,独立渠道购买此类特色产品。漳州风云电气设备有限公司不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的,并不表示与任何权利持有人有任何关联或授权。