EasyGen-350包括一个前HMI/人机界面。该面板包括一个7段字母数字显示器、发光二极管和几个按钮。led用于在模块运行期间显示数值，其中数值以数字显示。请参考Woodward手册或用户指南，了解本装置上可能显示的数值和信息的完整列表。显示屏也用于显示报警状态。前面板上的其他符号显示发动机警报状态，如电池电压过低、机油压力、发动机超速/低速和冷却液温度过高。

操作控制器时，控制器的工作温度应在零下20摄氏度到零上70摄氏度的范围内，如果在华氏温度下操作，则应在零下4摄氏度到零上158摄氏度的范围内。

EasyGen-350

EasyGen-350 is manufactured by Woodward Corporation, The EasyGen-350 model is a generator set control module component that is part of the Woodward EasyGen-300 series generator set controller. This series provides multiple functions, including but not limited to password protection configuration, engine start sorting, generator voltage measurement, and data measurement, including measuring battery voltage, speed, coolant temperature, oil pressure, and temperature.

EasyGen-350 includes a front HMI/human-machine interface. This panel includes a 7-segment alphanumeric display, light-emitting diodes, and several buttons. LED is used to display numerical values during module operation, where the values are displayed in numerical form. Please refer to the Woodward manual or user guide for a complete list of values and information that may be displayed on this device. The display screen is also used to display the alarm status. The other symbols on the front panel display the engine alarm status, such as low battery voltage, oil pressure, engine overspeed/low speed, and high coolant temperature.

When operating the controller, the operating temperature should be within the range of minus 20 degrees Celsius to minus 70 degrees Celsius. If operating at Fahrenheit, it should be within the range of minus 4 degrees Celsius to minus 158 degrees Celsius.