The GE Drive Control/LAN Communication Board DS200LDCCH1ANA has multiple microprocessors that provide control for drive, motor, and I/O functions. It also provides control over the local area network. The GE Drive Control/LAN Communication Board DS200LDCCH1ANA is equipped with four microprocessors, each with an independent function. A microprocessor provides driver control processing. A microprocessor provides motor control processing. A microprocessor provides common motor processing. A microprocessor provides local area network control processing.
If the board does not function properly or does not seem to provide optimal performance, you may need to perform a soft reset on the board. Hard reset refers to a power interruption that requires the circuit board to be restarted. If possible, this situation should be avoided and only occurs when the drive experiences a fault or trip condition that causes the drive to unexpectedly shut down. For example, if an overload occurs, the drive will automatically shut down to protect the components and motor.
A better option to restart the circuit board is soft reset. At this point, there is still power on the circuit board to clear the fault. One method of performing a reset is to press the reset button on the board. Only qualified personnel can perform this operation, as there is a risk of electric shock or burns due to the presence of electricity in the frequency converter. It requires service personnel to reach into the cabinet and press the reset button. Press and hold the button for about 5 seconds, then release the button.