伍德沃德系列2301A是漳州风云为您提供的众多控制系列之一。9907-018型号是一个低压型号，它作为一个单执行器系统运行，并且不提供减速斜坡。该型号也是一种正向控制装置，在0-200 mA的执行机构电流下运行，并通过了CE认证。低压型号的电压源在20-40 Vdc范围内。

对于低电压型号，确保在将屏蔽连接到控制装置时，绝对不要使用端子零，控制装置框架的前面会显示“不使用”。用于给原动机提供正极直流电源的触点是端子16，该端子也与端子14、17、18、19和30互锁，这些端子也是直流电源和正极连接点。

控制器上的致动器补偿电位计通常用作稳定控制器和原动机的手段。如果在使用过程中出现极端不稳定或控制异常活跃，通过顺时针非常缓慢地转动电位计来降低致动器补偿。如果需要，可将致动器补偿电位计完全逆时针设置，但这样做时要小心，不要过度扭转电位计。

如果在操作过程中，您正在调整增益电位计，并且原动机上的速度有暂时变化，则调整可能进行得太快，要解决这一问题，请确保调整进行得较慢。

9907-018

The Woodward series 2301A is one of the many control series provided by Zhangzhou Fengyun for you. The 9907-018 model is a low-voltage model that operates as a single actuator system and does not provide a deceleration ramp. This model is also a forward control device that operates at an actuator current of 0-200 mA and has passed CE certification. The voltage source for low-voltage models is within the range of 20-40 Vdc.

For low voltage models, ensure that terminal zero is never used when connecting the shield to the control device, as the front of the control device frame will display “Not Used”. The contact used to provide positive DC power to the prime mover is terminal 16, which is also interlocked with terminals 14, 17, 18, 19, and 30. These terminals are also the connection points for the DC power and positive.

The actuator compensation potentiometer on the controller is commonly used as a means of stabilizing the controller and the prime mover. If extreme instability or abnormal control activity occurs during use, reduce actuator compensation by turning the potentiometer very slowly clockwise. If necessary, the actuator compensation potentiometer can be set completely counterclockwise, but be careful not to excessively twist the potentiometer.

If you are adjusting the gain potentiometer during the operation and there is a temporary change in speed on the prime mover, the adjustment may be made too quickly. To solve this problem, make sure the adjustment is made slowly.