当处理9905-133控制时，确保在控制变压器和电流变压器的连接处，A相变压器连接到端子1，B相连接到端子2，C相连接到端子3，电压互感器二次线间电压必须在90-240 Vrms范围内。控制器上有四个额定速度范围，所有范围都以赫兹为单位；500-1500、1000-3000、2000-6000和4000-12000，启动原动机之前的典型设置范围为2000-6000。如果使用带控制装置的磁性传感器，确保速度范围开关与磁性传感器所处的位置相匹配。

打开控制装置的包装时，务必确保控制装置没有损坏，无论是凹陷的面板、划痕、松动和断裂的端子，还是松动和断裂的端子螺钉。

在模型上，速度和负载共享部分检测和管理两个特定的功能；模型的速度控制保持原动机停留在适当的速度；在几台发电机同时运行时使用负载共享，负载共享功能检测发电机承载的负载，并影响系统提供的所有发电机上的负载，必须进行相关共享。

9905-133

When handling 9905-133 control, ensure that at the connection between the control transformer and the current transformer, Connect the A-phase transformer to terminal 1, Connect phase B to terminal 2, Connect phase C to terminal 3, and the voltage between the secondary lines of the voltage transformer must be within the range of 90-240 Vrms. There are four rated speed ranges on the controller, all in hertz units; 500-1500, 1000-3000, 2000-6000, and 4000-12000, the typical setting range before starting the prime mover is 2000-6000. If using a magnetic sensor with a control device, ensure that the speed range switch matches the position of the magnetic sensor.

When opening the packaging of the control device, make sure that it is not damaged, whether it is a sunken panel, scratches, loose and broken terminals, or loose and broken terminal screws.

On the model, there are two specific functions for detecting and managing speed and load sharing; The speed control of the model keeps the prime mover at an appropriate speed; When several generators are running simultaneously, load sharing is used. The load sharing function detects the load carried by the generator and affects the load on all generators provided by the system. Relevant sharing must be carried out.