伍德沃德2301A系列的9905-037型号是反向作用高压型号；9905-037型号在0-20 mA致动器电流下运行，带有单独的致动器。在开始安装您的9905-037装置之前，请确保一切正常，模型没有任何损坏，检查模型的接线是否正确，模型没有任何损坏、缺失或松动的螺钉，也没有任何损坏的端子，任何这些东西都会妨碍您的控制性能。

一旦您确认您的装置没有任何损坏，并且看起来处于良好的工作状态，您就可以开始将控制装置安装到原动机上，您的控制装置将带有工厂设置的电位计，这些电位计可以根据需要进行调整，以使您的控制装置和发动机能够正常工作。如果您使用的发动机主要是汽油或汽化气体，以及蒸汽涡轮机，调节致动器补偿电位计，当调节该电位计时，它应该落在0-10标度上的6。如果在操作发动机时，致动器过于活跃，稍微减小致动器，如果发动机扭转导致不受限制的燃油连杆运动，则可以将致动器完全逆时针设置。

9905-037

The 9905-037 model of the Woodward 2301A series is a reverse acting high-voltage model; The 9905-037 model operates at 0-20 mA actuator current and comes with a separate actuator. Before starting to install your 9905-037 device, please ensure that everything is normal, the model is not damaged, the wiring of the model is checked for correctness, there are no damaged, missing or loose screws, and no damaged terminals on the model, any of which will hinder your control performance.

Once you confirm that your device is not damaged and appears to be in good working condition, you can start installing the control device onto the prime mover. Your control device will come with factory set potentiometers that can be adjusted as needed to ensure that your control device and engine can function properly. If your engine is mainly gasoline or vaporized gases, as well as steam turbines, adjust the actuator compensation potentiometer. When adjusting the potentiometer, it should fall on the 0-10 scale of 6. If the actuator is too active while operating the engine, slightly reduce the actuator. If the engine torsion causes unrestricted fuel linkage movement, the actuator can be set completely counterclockwise.