该系列中的一个控制器是8440-1857控制器。这种控制由电池/充电交流发电机供电，必须这样做，因为该系列在控制中没有隔离电源。

将充电交流发电机连接到控制装置时，它将通过端子52和53连接，端子53也标记为端子A，端子52标记为端子b。D+(辅助励磁)输出连接到控制装置的端子B，8-40 Vdc(蓄电池B+)连接到端子a。

当您使用控制装置和1Ph 3W测量范围时，特别是1Ph 3W的最大测量范围有两个Vac范围，分别用于接线端子14、16、18和20，范围读数为0-600或0-150。请注意，不同的电压系统必须使用不同的接线端子。

使用控制装置的发电机电流时要格外小心，在断开装置之前，应确保电流互感器已经短路，否则会导致负载缺失时产生危险的高电压。

8440-1857

One controller in this series is the 8440-1857 controller. This control is powered by a battery/charging AC generator and must be done as this series does not have an isolated power source in the control.

When connecting the charging AC generator to the control device, it will be connected through terminals 52 and 53, which are also marked as terminal A and terminal 52 as terminal b. The D+(auxiliary excitation) output is connected to terminal B of the control device, and the 8-40 Vdc (battery B+) is connected to terminal a.

When you use the control device and the 1Ph 3W measurement range, especially the maximum measurement range of 1Ph 3W, there are two Vac ranges used for terminal 14, 16, 18, and 20, with range readings of 0-600 or 0-150. Please note that different voltage systems must use different wiring terminals.

Extra caution should be taken when using the generator current control device. Before disconnecting the device, ensure that the current transformer has been short circuited, otherwise it may cause dangerous high voltage when the load is lost.

5464-654 – WOODWARD – MODULE DIGITAL OUTPUT NETCON 5000

5463-877 – WOODWARD – MODULE DIGITAL OUTPUT NETCON 5000 4 CHANNEL

5464-214 – WOODWARD – MODULE DIGITAL OUTPUT NETCON

5464-385 – WOODWARD – MODULE DIGITAL OUTPUT NETCON 5000

5468.787 – WOODWARD – MODULE DIGITAL OUTPUT NETCON 5000

9905-373 – WOODWARD – DSLC CONTROL MODULE 120V 500HZ PWM

5463-783 – WOODWARD – INPUT MODULE DIGITAL 24POINT

17341001 – WOODWARD – SOLENOID VALVE

DC35000000024 – WOODWARD – ACTUATOR

PROTECH203 – WOODWARD – OVER SPEED PROTECTION SYSTEM

82731013 – WOODWARD – CONTROL

9905-367 – WOODWARD – DIGITAL SYNCHRONIZER LOAD CONTROL

9905-796 – WOODWARD – DIGITAL SYNCHRONIZER AND LOAD SENSOR

9905110111 – WOODWARD – SPEED CONTROL

8404008 – WOODWARD – ACTUATOR

8406-113 – WOODWARD – OPERATOR INTERFACE EGCP-3 CONTROL 18-32VDC 20W

8200-226 – WOODWARD – SERVO POSITION CONTROLLER W/MARINE LISTING

84402052 – WOODWARD – CONTROL

5466-355 – WOODWARD – MODULE, REMOTE TRANSCEIVER INTERFACE

8561904 – WOODWARD – GOVERNOR

8273-1012 – WOODWARD – 2301E, 24VDC INPUT, HAZARDOUS LOCATION,

5463-785 – WOODWARD – INPUT MODULE ANALOG 420 8POINT

5463-879 – WOODWARD – INPUT MODULE THERMOCOUPLE TYPE ALL 8POINT

84401934 – WOODWARD – CONTROL

9907-004 – WOODWARD – MASTER SYNCHRONIZER/LOAD CONTROL

84401579 – WOODWARD – MODULE

8440-1878 – WOODWARD – SYNCHRONIZER AND LOAD CONTROL DIGITAL

5456-676 – WOODWARD – TRANCEIVER MODULE

9907-1290 – WOODWARD – CONTROL PROACTII W/HIGH OUTPUT SENSOR CIRCUIT

84401925 – WOODWARD – MODULE

8272387 – WOODWARD – POWER SENSOR

8406-120 – WOODWARD – GENERATOR CONTROL 4INPUT 150-300VAC 40-70HZ EGCP-2

99071289 – WOODWARD – CONTROL