控制部件8440-1799来自AX Control提供的Woodward EasyGen 300系列。控制装置安装在伍德沃德easYpack中，尺寸为158 x 158，重量约为450克。控制装置上的冲击读数峰值应为40 Gs，并且只持续11毫秒。控制接口标记为RS232接口。控制器有三种操作模式，手动、停止和自动。操作控制装置时，注意控制装置上的停止模式与紧急停止功能不同，这一点非常重要。

在您的控制面板上有几个报警类别，它们是B类和F类，但是A类、C类、D类和E类可以配置到您的控制面板上，如果您在控制面板上配置了A类、C类、D类和E类，它们各有不同的用途。D级警报在屏幕上有一个可见的显示，它有一个用于关闭GCB的继电器，将控制GCB断电，如果发生D级警报，还会发出警报和喇叭。

该控制器的测量电压为40 Vac，最大测量电压为346/00 Vac，控制器上的发电机频率应为15.0至85.0 Hz。

8440-1799

The control components 8440-1799 come from the Woodward EasyGen 300 series provided by AX Control. The control device is installed in Woodward easYpack, with a size of 158 x 158 and a weight of approximately 450 grams. The peak impulse reading on the control device should be 40 Gs and only last for 11 milliseconds. The control interface is marked as an RS232 interface. The controller has three operating modes: manual, stop, and automatic. It is very important to note that the stop mode on the control device is different from the emergency stop function when operating the control device.

There are several alarm categories on your control panel, which are Class B and Class F, but Class A, Class C, Class D, and Class E can be configured on your control panel. If you configure Class A, Class C, Class D, and Class E on the control panel, they each have different purposes. The D-level alarm has a visible display on the screen, which has a relay for closing the GCB, which will control the GCB to power off. If a D-level alarm occurs, it will also sound an alarm and horn.

The measured voltage of this controller is 40 Vac, with a maximum measured voltage of 346/00 Vac. The generator frequency on the controller should be between 15.0 and 85.0 Hz.