产品细节：3500/62-04-00 过程变量监视器

3500/62过程变量监视器是一个6通道监视器用于加工机器的关键参数诸如压力、流量，温度和水平。监视器接受+4至+20毫安的电流电流输入或-10之间的任何比例电压输入直流电和+10伏直流电。它调节这些信号并进行比较用户可编程报警的调节信号设定点。
3500/62显示器:
l连续比较监控参数根据配置的报警设定值驱动报警机械保护。
l为两者提供基本的机器信息操作和维护人员。您可以使用3500框架对3500/62进行编程执行电流或电压的组态软件测量。3500/62提供三个I/O模块信号输入场景:+/-10伏DC，隔离4-20毫安，或4-20 mA，带本质安全齐纳安全栅。内部屏障I/O提供外部电源输入端子，以提供4-20 mA传感器的本质安全电源当用于三模冗余(TMR)时配置，您必须安装过程变量监视器三个一组彼此相邻。当用于这种情况时配置中，监视器采用两种类型的投票来确保准确操作并避免机器损失单点故障保护。

3500/62-04-00

The 3500/62 Process Variable Monitor is a 6-channel monitor used for processing key parameters of machines such as pressure, flow rate, temperature, and level. The monitor accepts a current input of+4 to+20 milliamperes or any proportional voltage input between -10 for DC and+10 volts DC. It adjusts these signals and compares the adjustable signal set points for user programmable alarms.
3500/62 monitor:
Continuous comparison of monitoring parameters drives alarm mechanical protection based on configured alarm settings.
Provide basic machine information for both operators and maintenance personnel. You can use the 3500 framework to program and perform current or voltage configuration software measurements on the 3500/62. 3500/62 provides three I/O module signal input scenarios:+/-10 V DC, isolated 4-20 mA, or 4-20 mA, with intrinsic safety Zener safety barriers. Internal barrier I/O provides external power input terminals to provide intrinsically safe power for 4-20 mA sensors When configured for the third mock examination redundancy (TMR), you must install process variable monitors in groups of three adjacent to each other. When used in this situation, the monitor uses two types of voting to ensure accurate operation and avoid machine loss of single point of failure protection.