产品详情：2711P-T12C4A6 人机界面(HMI)设备

Allen-Bradley 2711P-T12C4A6是一种触摸操作的人机界面(HMI)设备，可兼容安装在不同行业的各种工业应用中。该电子设备是bulletin 2711P PanelView Plus 6产品系列操作员终端的一部分，通常安装在工厂车间，提供集中的过程可视化和对连接的机器或过程的控制。

该终端与定制设计的应用程序一起下载，该应用程序沿着控制界面表示系统的测量和控制点，允许用户输入必要的控制动作。2711P-T12C4A6配有12.1英寸彩色显示屏，分辨率为800 x 600像素，可视区域为246 x 184毫米(9.7 x 7.2英寸)。).该屏幕具有可调的对比度和亮度，以获得更清晰的视图，并最大限度地利用背光。该屏幕还具有模拟电阻触摸屏界面，在10-110 g的操作力下，该界面的额定驱动力为100万次。

该终端预装了一个逻辑模块。该逻辑模块提供128 MB RAM和128 MB非易失性存储器。

2711P-T12C4A6通过支持短距离点对点通信的嵌入式RS232接口和用于长距离多节点通信的以太网通信端口与合作伙伴自动化设备通信。

交流供电的Allen-Bradley 2711 p-t12c 4a 6 panel view Plus 1250触摸屏终端基本单元配有128 MB闪存和128 MB RAM，以及内置的以太网和RS-232端口。在这个基础终端上发现的是一个模拟触摸屏，它是一个18位有源矩阵薄膜晶体管屏幕，尺寸为12.1英寸。该屏幕的总显示面积为9.7 x 7.2英寸，分辨率为800 x 600。它还配备了一个可更换的背光，平均寿命为50，000小时，亮度为300尼特。2711P-T12C4A6终端还内置一个实时时钟，该时钟由电池供电，用于为关键数据添加时间戳。它使用x86、英特尔赛扬处理器，总线速度为650 MHz，配有一个CompactFlash插槽，键盘和鼠标各有一个USB端口。

该端子在47至63赫兹线路频率下的输入电压为85至264伏交流电。请注意，2711P-T12C4A6端子的最大功耗为160 VA。对于该终端，其室温应在0到55摄氏度之间。c当在-25和70度之间运行时c不运行或存放时，其外壳等级为NEMA 12、13、4X、IP54或IP65。该终端的重量约为3.4千克或7.6磅，尺寸为11.12 x 16.36 x 2.18英寸。

2711P-T12C4A6

Allen Bradley 2711P-T12C4A6 is a touch operated Human Machine Interface (HMI) device that is compatible with various industrial applications in different industries. This electronic device is part of the bullet 2711P PanelView Plus 6 product line operator terminal, typically installed in factory workshops, providing centralized process visualization and control over connected machines or processes.
This terminal is downloaded together with a custom designed application that represents the measurement and control points of the system along the control interface, allowing users to input necessary control actions. The 2711P-T12C4A6 is equipped with a 12.1-inch color display screen with a resolution of 800 x 600 pixels and a viewing area of 246 x 184 millimeters (9.7 x 7.2 inches) This screen has adjustable contrast and brightness to achieve clearer views and maximize the use of backlight. The screen also has a simulated resistance touch screen interface, with a rated driving force of 1 million times under an operating force of 10-110 g.
This terminal is pre installed with a logic module. This logic module provides 128 MB of RAM and 128 MB of non-volatile memory.
2711P-T12C4A6 communicates with partner automation devices through embedded RS232 interfaces that support short distance point-to-point communication and Ethernet communication ports for long-distance multi node communication.
The Allen Bradley 2711 p-t12c 4a 6 panel view Plus 1250 touch screen terminal basic unit powered by AC is equipped with 128 MB flash memory and 128 MB RAM, as well as built-in Ethernet and RS-232 ports. On this basic terminal, an analog touch screen was discovered, which is an 18 bit active matrix thin-film transistor screen with a size of 12.1 inches. The total display area of this screen is 9.7 x 7.2 inches, with a resolution of 800 x 600. It is also equipped with a replaceable backlight, with an average lifespan of 50000 hours and a brightness of 300 nits. The 2711P-T12C4A6 terminal also has a built-in real-time clock, which is battery powered and used to add timestamps to critical data. It uses x86 and Intel Celeron processors, with a bus speed of 650 MHz, and is equipped with a CompactFlash slot. The keyboard and mouse each have a USB port.
The input voltage of this terminal is 85 to 264 volts AC at line frequencies of 47 to 63 Hz. Please note that the maximum power consumption of the 2711P-T12C4A6 terminal is 160 VA. For this terminal, its room temperature should be between 0 and 55 degrees Celsius. When operating between -25 and 70 degrees Celsius and not in operation or storage, its housing rating is NEMA 12, 13, 4X, IP54 or IP65. The weight of this terminal is approximately 3.4 kilograms or 7.6 pounds, with dimensions of 11.12 x 16.36 x 2.18 inches.