25C-D4P0N114 is a PowerFlex 527 adjustable frequency AC driver. This drive achieves basic motor control by performing standard functions such as start/stop/forward/backward and jog control. It also controls the speed of the AC motor by changing the frequency output provided to the motor using various control methods such as volts/hertz, sensorless vector control (SVC), and energy-saving sensorless vector control. For positioning and speed loop control, 25C-D4P0N114 has a specific control method to meet this requirement, especially closed-loop speed vector control, but this can only be achieved when the driver is equipped with an optional encoder feedback module.
25C-D4P0N114 can also be used as a motor protection and energy-saving device. The programmable parameters of this driver, such as acceleration, deceleration, acceleration, and deceleration, as well as various stop modes, can prevent the motor from bearing operating pressure and sudden changes in current and power. It can also enable the motor to change its operating mode in a more effective and safe way. Meanwhile, preventing current, voltage, and power surges reduces energy consumption.
The input voltage requirement for 25C-D4P0N114 is 380-480VAC, three-phase. The output characteristics of this driver include an output voltage of 0-460Vac, three-phase; Programmable output frequency is 0-590 Hz, output current is 4.0 amperes, output power is 1.5 kW (2.0 horsepower), suitable for normal and heavy-duty operation. This driver has an embedded dual Ethernet communication interface and supports linear, star, and ring topologies. Through this communication port, direct integration with the Logix Programmable Automation Control (PAC) platform can be achieved.
The PowerFlex 527 series drives are programmed using a set of motion commands in Studio 5000 software, which are the same as those used in AB Kinetix series servo drives. In this way, when it is necessary to implement servo and AC drives on the same machine, users can utilize the same drive configuration knowledge and extra programming time.
The 25C-D4P0N114 AC drive operates at 480 volts AC (three-phase) with a working current of 4 amperes and a rated power of 1.5 kilowatts (2 horsepower). It must be stored in an IP20 housing. It integrates EMC filters and braking resistors. The control types provided for the device include volts/hertz, SVC energy-saving devices, sensorless vector control (SVC), and closed-loop (position or speed) vector control (with optional encoder cards only). For communication purposes, the drive uses dual ports of Ethernet/IP and security systems over the network. Supports multiple network topologies and device level ring (DLR) functionality.