产品详情：200-560-000-018 200-560-101-015 VM600 IOC4T Vibro-meter 输入/输出卡

VM600机架式机械监控系统使用的MPC4和MPC4SIL机械保护卡的高质量、高可靠性接口(输入/输出)卡。IOC4T卡支持4个动态通道和2个转速计(速度)通道，所有这些通道都可以独立配置。IOC4T接口卡安装在VM600 ABE04x机架的后部，在MPC4卡或MPC4SIL卡的正后方，以形成卡对。

特征

• MPC4或MPC4SIL卡的输入/输出(接口)卡–支持4个动态通道和2个转速表通道
• 每个动态通道和每个转速表通道的差分信号输入和传感器电源输出
• 每个动态通道的差分缓冲(原始)传感器输出
• 每个动态通道的DC输出可配置为基于电流的信号(4至20 mA)或基于电压的信号(0至10 V)
• 4个可配置继电器，每个继电器有两个触点，以及报警复位(AR)、危险旁路(DB)和跳闸倍增(TM)控制输入

VM600 IOC4T

The VM600 rack mounted mechanical monitoring system uses high-quality and highly reliable interface (input/output) cards for MPC4 and MPC4SIL mechanical protection cards. The IOC4T card supports 4 dynamic channels and 2 tachometer (speed) channels, all of which can be independently configured. The IOC4T interface card is installed at the rear of the VM600 ABE04x rack, directly behind the MPC4 card or MPC4SIL card, to form a card pair.
feature
Input/output (interface) card for MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
Differential signal input and sensor power output for each dynamic channel and each tachometer channel
Differential buffering sensor output for each dynamic channel
The DC output of each dynamic channel can be configured as a current based signal (4 to 20 mA) or a voltage based signal (0 to 10 V)
4 configurable relays, each with two contacts, as well as alarm reset (AR), danger bypass (DB), and trip multiplication (TM) control inputs